Transmission tail shaft bushing (s) and seal for 64 with TH400

Now that I have acquired a transmission mount for my car I want to also buy a transmission tail shaft bushing (s) and seal. I remember Clovis mentioned he replaced his a while ago-any chance part numbers could be shared?

Thanks

Norm

Views: 642

▶ Reply to This

Replies to This Discussion

Permalink Reply by Norman Silverman on April 2, 2021 at 10:24am

Interesting-the tech who worked on the car mentioned wanting to check that when he did his test drive. I guess it was good. The remaining vibration is speed sensitive and feels rotational. That said, however, I'm going to ask if that inspection was actually done. 

Thanks, Russ!

Permalink Reply by Norman Silverman on April 2, 2021 at 12:14pm

After thinking it through a bit more carefully, I believe whatever was the original source of vibration is still there but because the drive-line "anchorage" has been tightened and strengthened, the manner in which the vibration is now experienced has changed. Just for "shitz and giggles" do you know where I can buy the bushing (s) ? Thanks! 

Permalink Reply by Norman Silverman on April 2, 2021 at 9:27pm

Thank you!!

RSS

Photos

  • Add Photos
  • View All

Members

Forum

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 10 hours ago. 2 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Anyone Ever Hear of or Use Gary's Steering Wheels

Started by Jason Edge in Restoration Discussion. Last reply by Chris Codd 21 hours ago. 3 Replies

Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue

Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets

Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 6 Replies

Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit.  Today I installed the left driver side cad plated fender skirt…Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion. Last reply by Logan Robb on Thursday. 4 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment



Continue

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Events

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service