Dino Wiper Swap
Yesterday I finally pulled my already very nice windshield wiper motor and washer pump assembly in my 64 Coupe de Ville 'Dino', to replace with a rebuilt unit I have had a couple of years and recorded a quick video before removing. Here is that video clip testing the one I removed, then a picture of the rebuilt one installed. Both were very nice motor/washer pump assembles. The old one went shipped out to a Chapter Member today.
Replies to This Discussion
-
Permalink Reply by Logan Robb on
-
Great video. Wondering if you could post a pic of the actual nozzles on the cowl? This is a future project on my 64 Fltwd and would like to come back to this thread.
-
Permalink Reply by Jason Edge on
-
Logan, Are yours missing? If so, I have plenty of the washer jet and nozzles as seen below for $10 each side. Email me at jasonedge64@outlook.com.
-
-
Based off of the photo, I suppose mine are not missing. I thought there to be some piece that connects to the end of the jet there. With the eye, it looks like it would shoot off to the side, not onto the w/s.
-Logan
Photos
Members
Forum
Front Fender Mounting Holes
Started by Mark Mata in 1963/64 Cadillac Specific Discussion. Last reply by Mark Mata yesterday. 5 Replies 0 Likes
Hello Chapter, I had a question on the mounting holes for the front…Continue
1963/64 Cadillac Chapter March 2025 Newsletter Posted
Started by Jason Edge in Newsletters. Last reply by Matti Roth Mar 3. 2 Replies 0 Likes
I have just completed and posted the March 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue
Dino Diaries - Feb 28, 2025: What's Good for the Convertible is Good for the Coupe!
Started by Jason Edge in General Discussion. Last reply by Jason Edge Mar 3. 6 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
© 2025 Created by Jason Edge.
Powered by
