Hi All,
I've looked thru the diagrams in the help page and dont see any non ac vacuum hose diagrams. im looking for both under the dash and engine bay diagrams. By the way, there also is no vacuum canister in the engine bay. i dont think it came with one since it was non ac. Am i missing something or do they not exist? my cars vacuum line are horrible, cracked and missing t's and fittings so any help would be appreciated.
Thx
Tags:
What year are you looking for? 1963 or 64?
There is no general overall vacuum diagram in the 1964 Cadillac Shop Manual for these cars and the ones that are there are mainly stemming from the AC/Heat or Heat System. The Heat system vacuum is on page 13-2, Fig 13-3. I have also inserted below.
If you compare tot he AC/Heat diagram on Page 13-21, Fig 13-17 it leaves off the line over to the vacuum fitting on engine from check valve but that part would be the same.
There is not smaller vacuum storage tank you your firewall if you do not have AC. If you have power vacuum door locks and/or power vacuum trunk you would have a very large vacuum storage container tucked under the left fender at firewall for these options.
You will find vacuum illustrations for vacuum door locks starting on Pag16-23, Fig 16-27 on and continued onto next page, and a large master vacuum diagram on page 16-28.
The vacuum power trunk lid section starting on page 16-77 Section 84 Vacuum Lock System has some pictures of vacuum components (release actuator and hose) but there is no illustration showing how it T's into the vacuum under dash, runs down right side of car and up and into the trunk lid. So very vague.
So, the Shop Manual is a bit vague on the vacuum circuits but does have some illustrations and a lot of written text. If you don't have a shop manual you will of course want to pick up a copy. I did go back and add the heat only vacuum schematics to both the AC/Heat and Vacuum Illustrations help pages, including the one below.
Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge on Tuesday. 2 Replies 0 Likes
Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf on Monday. 13 Replies 0 Likes
Hello Co-Members,I recently purchased a low mileage1963 Sedan Deville Park Avenue. It is extremely solid and runs well. Neverthelss, it has minor problems that need to be addressed before I can…Continue
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies 0 Likes
I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge. Powered by