Gentlemen,

Friday morning began with the dash painting complete. I spent the next day and a half putting the dash and instrument panel back together along with an upgraded radio and speakers. The rebuilt radio works and sounds great! It works like the original, with a new amp and bluetooth.  It’s fantastic! 
I changed the panel bulbs to high intensity halogen ones. At night, the instruments appear clear and bright. 
It was a slow process that tested my patience, but I stayed calm and focused and got it done by Saturday mid day.  It looks great and was so worth it!  I also rechromed the arm rests control bezels.  
Mike

 

Facebook Facebook

Views: 74

Reply to This

Replies to This Discussion

Hi Mike,

     You did a fantastic job on your dashboard and radio renewal.  The pictures you posted look great.  Quite a bit of work that deserves a lot of credit!

Dennis DiBari

Thank you,Dennis.

This was my first dash rebuild and I was a little anxious. But, I figured, “How do you eat an elephant? One spoon at a time.”  I took my time, and stopped when I began to feel frustrated and tired. The dash came together as it should have with just one little squawk: the top switch failed.  Otherwise, I’m very pleased with the outcome.

Mike

Mike,

     Encomium to you!  I never tackled an entire dashboard, and you deserve so much credit.  It turned out great.

Dennis DiBari

Nice! Do you have any video of how to remove the dash top?

Thanks

RSS

Photos

  • Add Photos
  • View All

Forum

where to find 1963 Cadillac Plastic Door Pin Anchors

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 9 hours ago. 2 Replies

Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 15 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service