I have a 1964 Convertible that has a replace elderblock carburetor and I'm looking to see how I can get a kick down for the tranny. I think the original carb. had one but I do not have it with this car. Any idea's?

Thanks

Views: 2506

Reply to This

Replies to This Discussion

The Turbo Hydramatic equipped 1964 Cadillacs (both convertible body styles) would have had the electric kickdown switch mounted on back left/driver side of the carb. I never connected mine as it seemed to have plenty of pickup without but plan to tackle it sometime. With that said, I do believe some of fabricated an electrick switch to the carb to replication the original kickdown switch. Perhaps someone will see this and post a link or pictures and details.

As a reference you can see the original setup with kickdown switch and attachment on throttle plate the depresses the plunger on a Carter AFB setup. Note the pink wire from ignition, and the white wire that goes down to transmission (looks yellowed in this picture but originally white).

The original switch mount bracket mounted to the carb side. The edelbrock does not have the attach points, but a bracket could possibly be made to mount to the top screws. 

If you need a kick down switch, shoot me an email to  russ85747@hotmail.com

Caddy Shack restorations

www.1963caddyshack,com

RSS

Photos

  • Add Photos
  • View All

Forum

Burning Rubber

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies

Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light?   Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue

Gas gauge only reads half when full

Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply

Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue

64 Brakes

Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service