I'm thinking of proposing some kind of informal Cadillac meet up in the Southern California area, perhaps LA or Orange County.  I live in Huntington Beach and there are a ton of old cars here.  For example, every Saturday morning from about 5 am to 8 am there is an informal gathering of about 100 + classic cars (only a couple of Cadillacs) and hot rods at Adams Ave. Donuts in Huntington Beach.  It's a great way to spend the morning. 

Anyone in the interested?

Mike.

Views: 20

Reply to This

Replies to This Discussion

Hi Mike,

     You better believe I'd join you at Adams Ave. Donuts on Saturday in the early morning.  However, the only issue is 3,000 miles of real estate between us.  I'd do it just to see your dash board work and new radio!  Wish I could.

Dennis DiBari, Cottekill, NY

I'm in the San Diego area, and would enjoy meeting some local 1963-64 enthusiasts.  

I can make it to South O.C okay in the Eldo, but wouldn't attempt L.A., due to the crazed 90 mph drivers in giant pickups that think nothing of cutting off a vintage car. Whenever I have to go to L.A., I take my 602hp Callaway Escalade, just to have a fighting chance. No one's getting past that, unless I let them.  

The other big problem in SoCal (and probably other big cities, too) is all the early morning motorcycle groups that routinely blast past the 80+ mph traffic at 140+...splitting lanes, passing in the emergency lane, etc.  I've seen some scary close calls.  Sat and Sunday morning are the worst for that.  

RSS

Photos

  • Add Photos
  • View All

Forum

Gear for power vent window

Started by James Barnes in Restoration Discussion. Last reply by Kurt 6 hours ago. 1 Reply

Im having a hard time locating the gear for the power vent window in my 64 Eldo. The existing one has 14 teeth and all I seem to be finding are ones with 17 teeth. Any suggestions?ThanksContinue

Rare Society of Automotive Engineers "The 1964 Cadillac Comfort Control" 1964 publication

Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue

Check out Marlina & David Stone's 1964 Coupe de Ville in January Self-Starter

Started by Jason Edge in Chapter Discussion. Last reply by Mack on Sunday. 2 Replies

We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter.   In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jan 21. 3 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service