Back to the hotel in Hickory NC with parts car #54 - a 1964 Series 62 Four Window Sedan. Lots of goodies on this beauty! Headed home with our prize tomorrow.

Views: 117

Reply to This

Replies to This Discussion

I still need a good glove box door latch my friend...

Matthew, I have a glove box latch if you are still looking.

Ian Osborne

Looking for a flexplate for my 64 DeVille. Let me know if it's available my man.

Hi George, Email me at to go on the Wait List. I have a few already on the list and of course this parts car has the Hydramatic driveplate.. so it will be a future parts car that starts to whittle down the list.

Gotcha. I should be on your list already. Thanks my man.

George. You are #5 of 5 with the first dating back to late 2018. I noticed none on the list are CLC or Chapter members. Join the CLC, then our Free Chapter and you will go to the front of the line and get first preference on all parts and 10% Discount.. OH. and you join the coolest car club on the planet and start receiving the award winning Self-Starter Magazine, and can join regions, attend Grand Nationals, go on driving tours and many other perks. It's a Win-Win-Win..and a few more Wins to boot!

Wow.. I knew it wasn't gonna be easy to find the flex plate but 3 years someone's been looking.? That's kinda a bummer. I'll check out the CLC when I get a minute and sign up. Thanks again.!

I've got 66 customers that have been waiting for really hard to find parts since 2013. The earliers entries are 2009.

George, I may have sourced a flex plate for you.   email me please;   with your zip code for a shipping quote. 

Will do



  • Add Photos
  • View All


CLC Chapters VP Bob Crimmins & CLC SW Regions VP, Self-Starter Art Director Tim Coy Visit

Started by Jason Edge in Chapter Discussion 12 hours ago. 0 Replies

The National Cadillac LaSalle Club had their Winter Board Member this Past Saturday, Feb 27, via zoom and as an elected board member I always attend ... usually in person, but because of COVID we…Continue

brake adjuster slots

Started by Doug Scarrow in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 yesterday. 1 Reply

   Has anyone drilled the backing plates and made the slots that allow brake adjustments without removing the wheel?  I have always hated the slots in the drums.Continue

New Batch of Embroidered Iron-On 1963/64 Cadillac Chapter Patches - $4 each

Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge on Tuesday. 2 Replies

As noted in our August 1963/64 Cadillac Chapter Newsletter:Around 6 years…Continue

Tags: Available, Patches, Chapter, Cadillac, 1963/64

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge on Tuesday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Need center support for convertible top

Posted by John Rueff on February 17, 2021 at 6:15pm 0 Comments

For my 1964 Cadillac Deville

Help on Removal of rear seatback on 64 convertible

Posted by Nile Bolen on January 8, 2021 at 11:44am 7 Comments

I'm trying to remove the rear seatback on my 1964 deville conv.  The only help on this site that I can find is the following:

The seatback, its bright stainless trim, and the speaker grille are removed as an assembly.  The seat back hangs on two hooks near the top, and is retained to the body by two bolts and washers near the floor, one on the right side, one on the left.Once these fasteners are removed, lift the seat back upward and free it from the hooks

I've removed…


Bumper lower bucket

Posted by Ray Schick on January 1, 2021 at 4:33pm 3 Comments

1964 Convertible Seats.

Posted by michael moorman on November 30, 2020 at 5:29pm 1 Comment

Are the front and rear seat frames the same for 63/64 Coupes and Convertibles because Original parts group  makes reproduction seat covers for 1963 only and and i prefer the 1963 seat pattern so with that being said does anyone have information regarding this thanks.


  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service