Hi all.

I had an interesting experience this weekend. I went on a 150 mile trip and kept up with traffic at 80 MPH. On one long uphill stretch  the car started to warm up (3/4 on the gauge) and it never did that before. I pulled over and saw some coolant released from the overflow, so I just raised the hood and let it sit for 20 minutes. I then started it up and the gauge had gone to half, so I re-entered the freeway and completed my journey with no repeat of the heating. When I bought the car it still had the original radiator in it, so I had it rodded and boiled, but not recored. I also replaced the radiator hoses, but could not find a lower one with a spring in it (like they all used to have when new). Now i think I know why the car ran hot (first time in the 3 years I've owned it; high speed and a vacuum in the lower hose that was not offset by a spring in the hose to keep it open. 

So, which manufacturer makes the correct lower hose for our cars that has a spring inside it?

Thanks

Norm

Views: 76

Reply to This

Replies to This Discussion

Norman 

How old or up to date is the coolant that is in the car now ?

Enjoy 

Your hose supplier answer SB along soon 

Enjoy 

Thanks. Everything is fine in the cooling system. I'm positive this (cooing hose collapse)  is what happened-I was going up a 2 mile grade at 85 mph in 85 degree weather. Any idea who still makes hoses with springs, or am I going to have to scout junkyards to find one?

Regards

Norm

Today I got confirmation of my radiator hose spring theory-took the same 150 mile trip at high speeds (75-80) as I took when the engine ran too warm last week, only this time with the spring inserted in to the lower radiator hose. The result: the temp needle stayed at one needle width beyond the first quarter mark (like I remember they did when they were new). Case closed. 

Where did you find the spring?

That's easy: I went to the name I trust for Cadillac parts over all others: the "JasonZone"

RSS

Photos

  • Add Photos
  • View All

Forum

63 rear main seal

Started by Luther in 1963/64 Cadillac Specific Discussion 4 hours ago. 0 Replies

Hello all , just spent better part of the weekend installing a new rear main seal and pan set on my 63 390 , all though it slowed the leak down considerably , l still have a drip , l used a Felpro…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Valve stem seals for 429?

Started by Matti Roth in Restoration Discussion. Last reply by Matti Roth on Friday. 7 Replies

Hello!I am rebuilding 429 for 64 DeVille and got Felpro head gasket kit including valve stem seals. Is it recommended to install those even though they are not originally used? O-rings will be…Continue

Blog Posts

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

V.I.N. where?

Posted by Robert Pellow on April 18, 2021 at 1:41pm 6 Comments

Where can I find the V.I.N. on a 63 convertible?  The usual space at the base of the interior windshield on the driver's side has been decimated by weather.

63 Trunk detail

Posted by Bob Pontius on April 8, 2021 at 3:07pm 6 Comments

Jason, I liked the detail and information you have provided. I would like to do mine similar to yours. Can you help? Do you have trunk material? OPGI is sending the trunk product for my 63 Fleetwood. But it does cover the entire trunk as yours was done. If you do not have can you give me a reference? Thanks!! Bob

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service