As i have had a little starter trouble. i was wondering,
after you turn the key, and the starter turns over and the engine starts,, does the starter have any further input or drain on the engine from the start forward.
Since the other day, when i had that episode where the engine fired up quickly after a 4 day layoff, and rode nicely for 30 minutes,, then, when i shut it down for 30 minutes, it was a complete no go,, just that heavy clunk sound... then,, 2 hours later, fires right up, and every day since, it has fired up immediately, so i am just wondering if there could be something else involved, and is the starter isolated from battery charge etc once the engine is running,, does it have any more function once started
Sincerely
Kim
Tags:
battery is less than 3 months old,,
starter rebuilt from usa parts, just got it a month ago as well,
will check the ignition, tomorrow, but haven't notice any plastic burning smell,,
hat the thought of another starter,, they are not cheap,,,
ok,, will head to the parts store to let them check it out,, give the ignition a check as well tomorrow..
thanks again,,
well i think my question has been answered,, maybe,
i went out to day to try and start,, it clicked twice,, then no click, then started to smell plastic burning,,, guessing i will need a new ignition switch??
Take the connector off and look for heat damage/discoloration. You may just need to change an individual connector in the plastic housing.
yes could see it smoking,, wires looked ok,, photos attached for interest of the damage,,
, first the temp ignition on generic set up, red to battery, pint to ignition and purple to solenoid,
second picture is the inside of the starter where its burnt, stinks,, smells like an old fireplace when you touch it,, the burn smell sticks to hands,,
current damaged ignition set up,, what is the blank stem for,, is there another something that should be attached to the ignition starter besides pink red yellow purple??
when i turn it on and wow,, it really started strong,,no sag, no delay,, will order parts when they open back up again
Kim, you have a generic ignition switch, and the 5th post is not used out the 63/64. I have a better than generic ignition switch, as it has the correct mount lug with the correct depth set in. tested good, you just put in your lock & key.
Todays black Friday special is 15.00 for a good used ignition switch.
things i have now noticed since the temp switch put in,
when radio is on, and i turn on the temp control levers, it shuts down the radio,
heater/defrost controls do not work,, guessing mush have to do with that yellow wire??
The yellow wire is the accessory feed, so your radio and other do dads wont work if there is no power to that.
email me at russ85747@hotmail.com if you want the ignition switch. The black Friday price ends soon , so email me with your zip code. After today, the price goes up.
Started by Patrick Westphal in For Sale. Last reply by Jason Edge 15 hours ago. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by