My Deville Conv. Is currently being repainted. Seems like a good idea to replace all the rubber seals: trunk, doors, top, bumper etc., when the car is put back together. Any recommendations on rubber “Sets” or is this piece by piece thing? Thanks for the input.
Tags:
Steele Rubber is listed under the Parts Suppliers tab. I've used their products and they are good.
Steele Rubber Products - www.steelerubber.com
Rubber products NC 800-544-8665
PDF Catalog s available for specific year and body style Cadillac from their website.
Steele has fantastic product. You can also go to their website and down load a custom PDF catalog for your particular model year and body style. If nothing else it is a good guide for names of these rubber seals!
Rubber the right way.com They carry alot of Steele rubber products, make their own, and are cheaper than Steele.
I think Rubber the Right Way can also provide a more complete package deal as I recall. If on a budget, like most of us, download the Steele PDF catalog, use it as a guide, and shop around on pricing. If I were buying everything I would shop around, but for an item or two I will go direct to Steele as I believe most of the rubber comes from them and if you have an issue with their product there is no 3rd party to deal with. I remember having an issues 10 years or so back with a door seal and called them and the response was immediate and had the correct item in like 2 or 3 days.
Thank you for the replies, everyome!
Travis J. Hensley Online
Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 9 hours ago. 1 Reply 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Saturday. 4 Replies 0 Likes
So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by