carburetor video
I know carburetor action/function is very old hat to many here, but i ran across this video with a guy that built a carb out of clear material, hooked up to his dads tiller, and used a high speed camera to film the function of a carb. It was fascinating!! As i have never really known for sure what was going on in there, this video made it completely clear the basics of a a carburetor. What was really interesting is the dad in the video seems to know a lot more about carbs that his engineer son!! the high speed camera really gives it meaning and context and gave me the visual explanation my brain needs to sort things
Replies to This Discussion
-
Permalink Reply by Kim K Kaiser on
-
Getting along good. Still in breakin, hvnt had a chance to do a lot of driving. I live in a rural area, and normal day to day driving as described it difficult as everywere i need to go is at hiway speed, and it says to avoid long hiway speed drives until 500 miles.
-
-
I hv about 250 miles on the breakin in. Got the o rings for the trans dipstick put in and chged trans filter while there. No more trans leak! Yeah! I hv the nss to try to fix. Put the ac comp back in and hook up, that would be abput it. Probably shoukdnt say this but its really a quiet engine at idle. Knock on wood, stays that way
Members
Forum
The $120,000 1963 Eldorado on Bring a Trailer
Started by Jason Edge in General Discussion. Last reply by Kurt yesterday. 6 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Fuel Supply System - Check Points Beyond the Fuel Pump
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Front grill
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 13 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Houston we have a problem!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Monday. 3 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
