All,
after being on my first outing my 1963 has a broken engine bearing and I have decided at this point to do a full engine remanufacture.
Do you have any experience or recommendations for Remanufacturers?
So far I have been in contact with Jasper's.
I am in Charlotte, NC.
Thanks
Daniela
Tags:
I had a customer come from Tennessee and pick up a rear end from me this week and we got to talking and he said he had had his engine rebuilt by Jasper a few years and a few thousand miles ago. My ears popped up since I had just read some negative stuff here about them and asked my customer how it went and he said "The car is running fine, not leaking or any issues." I told him well I guess you cannot ask for more than that.
This is one sample out of probably hundreds of engines they have rebuilt. It does not confirm they are good or bad overall ... but just thought I would share. I think they have picked up engines from me in the past when I might have 4 to 6 laying around, but that has been some time back. I had no issue with then and remember they paid a fair price for the engines. Just thought I would pass this along. If I considered them as a source for a rebuilt engines I would want to get many references, and some recent references with our 390's and 429's.
Daniela, If no one has a suggestion or reference you might try contacting EGGE Auto Parts. They are a known source for quality engine rebuild parts and think they would be a prominent supplier for quality rebuilders. You might ask them for recommendations. Parts would likely be sourced from them so that would be a win-win for both of you.
Here is there contact info:
EGGE Machine Company - www.egge.com
Pistons, Eng. Rebuild Parts
11707 Slauson Ave, Sante Fe Springs CA 90670
800-866-EGGE, www.egge.com
Also since you are in Charlotte area, home to NASCAR and engine rebuilders, maybe Travis from the Carolina Region can provide some reference. I have no one I would recommend in the Raleigh, NC area, not to mention it is 2.5 hrs away from you.
Daniela, my son had an engine rebuilt by Beal Racing Engines in Thomasville, NC. Even though they specialize in racing engines, they do work on most anything. My son had a Pontiac 455 engine rebuilt, and some enhancements to it for more hp, but nothing radical. They can probably rebuild/repair any engine. Their website is https://www.bealracingengines.com/ It might be worth a call to them to see what they can do for your engine.
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch 11 hours ago. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Jason Edge in Restoration Discussion. Last reply by Bill Wolf 21 hours ago. 3 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 22 hours ago. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by