Any idea how that idle vent valve is supposed to work in 64 Rochester 4GC? There is nothing in 64 Shop Manual and nothing in 64 Delco Rochester 4GC Bulletin. I assume open when idle and closed when gas pedal is pressed ?

Views: 227

Reply to This

Replies to This Discussion

I kindly ask anyone who has original Rochester in his 64 to check if there is that idle vent valve in carb. Small plate in my carb says 7024031 so it is original 64. Thank you in advance.

I have what appears to be the same 4GC in my 62 deville, but I don't know what it does nor does the repair manual really give much insight.  

Thanks Luke

but I did not catch if your carb has that idle vent valve which I am pointing in photo.

I would like to find out if that was in 64 original Rochester carb of not.

It does indeed.  Vent valve and that actuating tang.  The manual says 

-position fast idle cam so that fast idle screw is on the highest step of cam

-vent valve actuating tang on pump lever should be contacting vent valve so that the rubber disc is just off it's seat

-to adjust, bend actuating tang

Thanks Luke. Do you mean 62 factory service manual?

Yes, for 62, it is a a different OEM number for 64 but I have gone and looked at 64-66 4GC's but I don't think there is much between them.  The remans available online for 7024031 have the tang and idle vent valve, and the purpose and setup is surely the same.

I was watching this thread because I wanted to know what it did too!   

RSS

Photos

  • Add Photos
  • View All

Forum

Fender Trim Removal

Started by Kevin Wray in Restoration Discussion. Last reply by Jason Edge yesterday. 6 Replies

Thanks to Jason's expert advice, I was able to remove the fender trim on my 63 de Ville without removing the fender. Pics contain the locations of the 3/8 in nuts and how to access them. My clips…Continue

Tags: removal, trim

Body side molding install help needed

Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 3 Replies

I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue

ORIGINAL CAR

Started by David Erickson in General Discussion yesterday. 0 Replies

I have an all original 63 Cadillac Park Avenue.  It has won awards in the past in the Originality Category.  My question to the group is what types of work you can do on the car that does not cause…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service