My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue
For years my winds have seemed to be looser and less accurate than most modern windows. I am thinking the soft parts are worn. Has anybody gone through thier window regulators and felts to restore…Continue
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
Reply Deleted
This reply has been deleted. Return to the discussion.
Welcome to
63/64 Cadillac Website
Sign Up
or Sign In
Or sign in with:
Photos
Members
Jacob Foster
Rick Yasenchack
Erik LaValle
Brandon N.
Maurice Hamelink
thomas servas
Ian Arnold
Joe
Kevin deGraauw
Mack
Richard Janzen
Robert Dye
Forum
Replace Choke Tube or Install Electric Choke?
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by CHRIS CARLSON yesterday. 8 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
TH400 Dipstick Tube Seal
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Buonaccorso on Monday. 10 Replies 0 Likes
In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue
window regulators
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Saturday. 2 Replies 0 Likes
For years my winds have seemed to be looser and less accurate than most modern windows. I am thinking the soft parts are worn. Has anybody gone through thier window regulators and felts to restore…Continue
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Tags: width, whitewall, correct
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
Continue'63 Tailfin Tales
Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments 0 Likes
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…

ContinueEvents
2025 Murfreesboro, TN Grand National
June 2, 2025 to June 8, 2025 – Murfreesboro, Tennessee
2 Comments 0 LikesCLC & CLC Museum & Research Center National Events Through 2028
June 2, 2025 to May 1, 2026 – Across the USA!
1 Comment 0 Likes1963/64 Cadillac Chapter 2025 Grand National Meet-Up
June 4, 2025 from 7pm to 9pm – Embassy Suites by Hilton Nashville SE Murfreesboro, Oakleigh A Room
1 Comment 1 LikeVideos
May 16, 2024 Finish honing with a Torque plate
Added by CHRIS CARLSON 0 Comments 0 Likes
A Tour of the 2024 Cadillac Fall Festival’s All GM Car Show
Added by Kurt 0 Comments 1 Like
Vogler 64 radio repair
Added by Michael Vogler 1 Comment 0 Likes