Trivia 24 - Name the Part!
OK. It has been while since we had trivia and thought I would throw something at you out of my last Cadmium plating batch. I am always throwing things into these batches, sometimes just for kicks & grins. Well, here is a piece I just got back.
Name the part or describe where it goes for that elusive 1963/64 Cadillac Trivia Cigar!
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
Mark, I’m reaching for that cigar… but first: Where does it go?
-
-
Bingo! It is the rear upper spherical (ball) joint stud attached to rear upper control yoke (arm) that in term attaches to differential. It is a big guy using a a 9/16"-18 top lock nut on the end.
MARK .... HAVE A CIGAR!!!
-
Permalink Reply by 19riqs6furc4f on
-
I like the vintage 1993 Boston t shirt.
-
-
Yep, picked that up at the 2013 CLC Grand National in Boston.
Photos
Members
Forum
Quick weekend project
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 10 hours ago. 2 Replies 0 Likes
Looking to replace the belts and rad hoses. anyone have the part numbers for a 1964 Fleetwood w AC? thanks! Continue
Website Header - Experimenting with Rotating Member Cars
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies 0 Likes
I was thinking or rotating member 63's and 64's up in the header and used Mark Geertsma's 1963 Sedan de Ville as a test car. It gets a little grainy making the picture that small, but not too bad.…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 6 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Techniques for replacing pinion seal on differential
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 5 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 13 Comments 0 Likes
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
