On my '66 De Ville both of my turn signal indicators do not work despite that the regular turn signals work front and back. . I'm thinkiing that they are on a separate circute rather both are burned out at the same time.
Any thoughts
Jake
Tags:
Check bulbs, usually it’s a grounding issue clean the grounds on the lamps make sure they are cleaned.
Trace the wires coming from the lamps ,you’ll find the grounds, if that don’t work trace the wires back to the steering column, switch etc.
Thanx for your reply. First of all I mistakenly indcated that I have a '66 when actually it is a '64.
Turns out I underestimated the previous owner because when I removed the left side indicator from the fender the wire was broken off at the recepticle. I'm guessing that the right side is the same. I had thought the the fender indicator lights were operated by a completely seperate relay system like my '66 T-Bird.
Cheers
Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari 34 minutes ago. 1 Reply 0 Likes
We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter. In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 3 Replies 0 Likes
A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Chris Codd on Tuesday. 3 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge Jan 17. 6 Replies 0 Likes
Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit. Today I installed the left driver side cad plated fender skirt…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 16, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2025 Created by Jason Edge. Powered by