…has turned into a restoration. 
On stripping we found this really bad attempt to deal with a spot of rust on the left rear quarter panel.  Half a metal plate and a lot of bondo!

Views: 192

Reply to This

Replies to This Discussion

Tony,

Because I can’t get lacquer in CA, I went through probably 50 paint chips to try to match the color to Aspen White (the original color on the trunk lid hinges.  Believe it or not, Toyota #1 is almost indistinguishable to the eye (my eye anyway!).

Here is a picture of the hood as it was being color sanded.

Looks like mainly on a flat area. Shouldn't be too bad to repair by a decent body/metal person.   

RSS

Photos

  • Add Photos
  • View All

Forum

Carb noise

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle 8 hours ago. 2 Replies

Is this noise normal?file:///var/mobile/Library/SMS/Attachments/3f/15/BC6CEAEF-7328-499C-BCC6-18153DE3E63A/IMG_5863.MOVContinue

differential 1963 AC car

Started by Frank Murch in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies

I have a 1963 Cadillac A/C car differential. It is low miles and not a limited slip. I switch to a LSD but have this nice piece for several years. It is in San Diego, If interested let me know…Continue

Seam Sealer Locations?

Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson on Saturday. 2 Replies

Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue

Rear Defroster

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Saturday. 2 Replies

I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service