"There may be fasteners still on the frame. If I remember correctly, the lines ran along the center of the car along the X frame member. Ahead of the differential on the frame there is a fitting that allowed for the lines to run to the left and right…"
-
Bill Hatfield
- Male
- Jasper, TN
- United States
- Blog Posts (1)
- Discussions (9)
- Events
- Photos
- Photo Albums
- Videos
Bill Hatfield's Discussions
Brake lines
Started this discussion. Last reply by Dan Reed Aug 31, 2022. 1 Reply 0 Likes
Need help installing rear brake line. Mine is totally out of the car. 64 Fleetwood. I'd like to know how the brake line is routed from master cylinder to flexible line in the back of car. Also where…Continue
Rear brake line routing
Started Aug 29, 2022 0 Replies 0 Likes
Hey everybody. I have a 64 Fleetwood 60. I need to know how the brake line that runs from master cylinder to to the rear flexible line needs to be routed. Pics would be huge. Also It would be awesome…Continue
Transmission lines
Started this discussion. Last reply by Bill Hatfield Aug 27, 2022. 11 Replies 0 Likes
I need a little help with my THM transmission lines. I need to know what any fastening hardware looks like and where to fasten them. Any help is much appreciated.Continue
Door lock vacuum
Started this discussion. Last reply by Bill Hatfield Sep 18, 2019. 2 Replies 0 Likes
Hey folks. First post. I hope I'm doing it right. I currently restoring a 1964 Fleetwood 60 series Special. There is an egg shaped vacuum canister on the left side of the firewall behind the tire. It…Continue
Bill Hatfield's Page
Latest Activity
"Bill, I meant to get back to this yesterday but never made it back here. The 1964 Turbo Hydramatic has 2 metal lines from transmission to radiator. This is completely different setup from the 1963-64 Hydramatics that had short rubber hoses at…"
"Yes!!! Thank you. And I see where they are attached right before the starter. Are there any more? I want to thank everyone who has helped out. Trying to finish this up after 19 years of messing with it. "
"Original is with small rubber hoses between on both ends.
Different on the 64?"
"That is the right way, no rubber hoses."
"Bought a new set some years ago at OPGI, linings fit perfect but connections between rad and lines AND trans and lines were planned direct, no rubber hoses between."
"Here is photo how the lines are attached in front of the block. I hope it helps."
"Thanks. Really need to know how many fasteners and where they go. Thanks again."
Transmission lines
I need a little help with my THM transmission lines. I need to know what any fastening hardware looks like and where to fasten them. Any help is much appreciated.See More
"If it were not for you Jason, I'd go back to building old Mustangs .. Thanks"
"It T's into the line that goes into the vacuum fitting on back of intake. This is it's vacuum source. Here is a picture of the power door lock & power trunk tank showing the feed hose going thru fire wall then the other shoots to the…"
Door lock vacuum
Hey folks. First post. I hope I'm doing it right. I currently restoring a 1964 Fleetwood 60 series Special. There is an egg shaped vacuum canister on the left side of the firewall behind the tire. It has a vacuum fitting with two connections. I am thinking one connects to a hose going inside the car. Where does the other hose go?CaddyVacCanPwrDoorLock.jpgSee More
Profile Information
- Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
- 1964 Fleetwood
Bill Hatfield's Blog
Comment Wall
- No comments yet!
Members
Forum
Brake Booster not enough compression
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin 7 minutes ago. 3 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
For sale; Hydra Matic transmission
Started by Russ Austin in General Discussion 1 hour ago. 0 Replies 0 Likes
Known good Hydra Matic transmission for a 63 64 Cadi.Came out of my driving 63 coupe. I went the LS route.Resealed the pan, speedo drive, front and rear seals.Comes with a new rear…Continue
Houston we have a problem!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 5 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Commercial Chassis Dual Battery Tray Questions
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
