Along the painted metal portion above the grill there are small rubber type pieces along the length of the grill that I'm assuming are to fit against the hood. Does anyone know where to find those pieces I have one that is missing and a couple that appear broken or torn. I've been running into some pretty tough judges at shows.
Comment
When I saw them yesterday when I was quickly scanning the Steele Rubber online catalog my eyes immediately went to the bottom and mentally inverted them right sight up but wanted to make sure with the Cadillac part # they gave. I did go back and look at mine and I have one that is almost missing one tab..so it will be a nice little upgrade on my CDV also. If someone is missing say 1 or 2 of them, I will have a 6 extras to sell for say a couple of bucks each that I can combine with an order of something else. If all of your's are well worn I would go online and just order a set.
Thanks Jason, mine have no thickness left to them at all. Looking at the listing it would make sense that these would keep the hood from banging onto the grill. Seeing this picture I think I've seen these but not knowing what they looked like when new I passed over them.
Again thank you...you are two for three now all I need to find are those tin inserts. One popped up on ebay I think yesterday and keeping an eye on it.
I just ordered 2 sets for myself.
Kevin, Mine are all there but painted over. I think I can gently remove the paint but would just rather have new. I think I've tried to remove used but without much luck. I might try again.
Looking at the master parts book I think this is the part they are referring to as the Hood to Hood extension front Hood Panel Bumper which is part # 148 2384. Yesterday when I was looking thru Steele Rubber catalog I saw something that looked like them but upside down but wanted to go back and match #'s. I just pulled up there catalog and sure enough they say it replaced part # 148 2384.
The Steele Rubber # is 33-0861-42 and are $1.60 each.
Go on line at www.steelerubber.com or call 1800-544-8665
Kevin,
I meant to get back with you. I read this morning and thought you were talking about the small rubber bumpers on top of the upper grill top triangular painted piece. These are the items circled in picture below. I pulled up Steele Rubber's PDF Catalog thinking they would have them but couldn't locate them right way but didn't research from end to end. If this is what you need I would like some new ones for my 64 CDV Also. Here is the picture:
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 5 hours ago. 2 Replies 0 Likes
When I get a chance I like to go back and clean up, and scan the body plates from the parts cars I have brought in. For the last few years I generally do that as I dismantle each car but early on I…Continue
Started by Russ Austin in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 17 hours ago. 1 Reply 0 Likes
I have a pair of 63 tail light reflectors for sale. 50.00 each plus shipping. Please email me at russ@thecadishack.com Continue
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 25 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Jason Edge in Chapter Discussion. Last reply by Jason Edge on Friday. 2 Replies 1 Like
Dave Leash, the CLC Sales & Marketing Rep, has set up our own…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website