Carter AFB Idle Step Up Actuator
Recently, I was having some idle issues and found the vacuum at idle was very low. After testing everything I found the Idle Step Up Actuator had a leaking diaphragm. I contacted Daytona Parts to see if they had any, they didn't but said they could rebuild my actuator. I sent the actuator to them for the rebuild and was pleasantly surprised to receive it back looking like new. It looks great and holds vacuum with my MityVac. Hope it is pretty close to the proper adjustment when I get it installed.
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
Looks fantastic.
-
Permalink Reply by David Thomas on
-
Thanks Russ. For many years I've read on the CLC board how good these folks are. This is my first experience doing business with them, I'm very pleased with the outcome and transaction.
After posting the pictures, I installed the actuator. After dialing in the adjustment, it works as well as it looks!
-
-
Wow! That's a used part? Very nice work. Mind if I ask how much for the rebuild?
-
-
Clovis, Yes, it is the original part to the car. Rebuild including the return shipping was $62. I'd say it's as close to new as you can get.
-
Permalink Reply by Jason Edge on
-
Looks like new yellow/gold zinc coating too? Probably almost worth the price for that alone!
-
-
-
I added Daytona Parts to our Parts Suppliers Page.
-
-
I'm going to check mine for leaks. Always good to get into that habit with our older cars.
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Chris Codd on Wednesday. 1 Reply 0 Likes
Vintage Promo Picture #4 - 1963 Fleetwood 60 Special in Nevada Silver
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Wednesday. 0 Replies 0 Likes
Here is the 4th picture in my collection of "Promo Pictures" - another 1963 Fleetwood 60 Special. This 60 Special appears to be Nevada Silver, Paint Code 14. …Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Saturday. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
