Trivia Question 7 - Front Engine Cover
In addition to serving as the front engine cover, the 1963/64 Cadillac front engine cover also provides mounting for several other engine components. Who can list them out for the cigar?
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
This was definitely a group effort and Russ, Tony and Robert all get a cigar!
So here is a recap of components the front engine cover provides mounting, in addition to serving as the front cover, and providing timing marks:
oil pump, fuel pump, water pump, distributor, oil filter, oil filler tube, front seal, and partially for the oil pan.
-
Permalink Reply by 3ft7bqmb7dryo on
-
Y'all forgot about the fuel filter housing.
-
-
Not mounted to front cover, but is mounted to oil filler tube which Robert added. ...and of course oil filler tube also provides mounting for the oil filler tube cap. If we did the “Kevin Bacon” 2nd degree of mounting the list would probably run the into the dozens. Point here was to list those things directly mounted to front cover.
Bottom line was that the front engine cover was the ”Swiss Army Knife” for the 1963/64 engines!
-
-
Russ, I thought about that as I was drifting off to sleep last night; wife says I should get a life...
- ‹ Previous
- 1
- 2
- Next ›
Photos
Members
Forum
Trivia # 35 - All About the Windshields
Started by Jason Edge in Trivia. Last reply by Jason Edge 9 hours ago. 1 Reply 0 Likes
Keeping the trivia "glass related":- How Many Different Windshields Were Used On All 1963 & 1964 Cadillac Body Styles? - What were the two main differences or subgroups of windshields? Hint, one…Continue
alternator V belt
Started by Robert Alan Shannon in General Discussion. Last reply by Jason Edge yesterday. 3 Replies 0 Likes
Could anyone give me the Gates or Dayco number for the alternator V belt, just can't remember it and trying to get her back on the road after many years. 63 wA/CContinue
Tags: belt, V, alternartor
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Trivia #34 - What % of 1963 & 1964 Cadillacs Came with Tinted Glass
Started by Jason Edge in Trivia. Last reply by Jason Edge on Monday. 6 Replies 0 Likes
What % of 1963 and 1964 Cadillacs came with the optional "soft ray" tented glass? 1963 & 1964 were very close, so if you get one you will get the other. Need to get it within 3%. So, who will…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
-
December 14, 2025 - 63/64 Cadillac Chapter Zoom Meet-Up
December 14, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by
