On the 1963 and 1964 Series 62 Coupes there is one thing in particular that is missing in the rear passenger area that is found in all the other body styles including the 1963 and 1964 Series 62 Sedans.
Hint: it is a very common item especially for 1963 and 1964.
Tags:
Rear C Pillar lights?
Nope, all have rear courtesy lights:
- 1963 and 1964 Series 62 Coupes and Sedans have the courtesy light up in the C pillar.
- 1964 Coupe and Sedan de Ville have the rear courtesy light up in the C pillar.
- 1963 Sedan de Villes have the rear courtesy light on the rear door pull handle that matches the front door pull handle and courtesy light
- 1964 Coupe de Villes have the rear courtesy light on the rear qtr upper trim piece that matches the pull handle on the doors pull handle and courtesy light.
- 1963 and 1964 convertibles have rear courtesy lights in the rear qtr arm rest.
... so all body styles have rear courtesy lights.
Armrest?
Nope.. 1963 and 1964 Series 62 Coupes have nice long side arm rests on the rear qtr interior panels, and a center pull down arm rest in the rear. (The Series 62 Coupe and Sedan does not have the center fold down arm rest in the front however).
I could give you guys a major hint but it would make it way to obvious. How about this. What is an amenity you would expect in the back of a Cadillac in 1963 and 1964?
A hot blonde nymphomaniac who's Dad owns a Pub.
Now you're talking! ... but NOPE! Those were only special order items in Coupe de Villes with the '896' Eldo horn. Only problem is "Dad" has a shot gun he keeps behind the bar counter!
Did the Series 62 not have the light switch on the back of the front seat?
Nope... not it.
Speaker?
Nope.
That's OK Tiny, we all have bad days. :-)
Travis J. Hensley Online
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles 12 hours ago. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Started by tim sparks in General Discussion 18 hours ago. 0 Replies 0 Likes
anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue
Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply 0 Likes
Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark yesterday. 13 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by