Body Mounts Pad & Cushion
Does anyone know where I can purchase the correct pads and cushion ( body to frame) that go on my 1964 Cadillac convertible. I thinking of replacing them as they are dry rotted but I would like to get them first without taking them off the car. Not sure what to order, size or where to get them. Any help would be appreciated.
Thanks
Dominic
Replies to This Discussion
-
Permalink Reply by 24ro8f5mbs2jc on
-
You should do fine with:
There are others in "Parts Suppliers".
Also check "Help" for additional information.
-
Permalink Reply by Dominic Salemi on
-
Andrew
Thanks but I have that, when you go to these places they call out details but not sure if they fit my car.
-
-
Dom, generally if the seller says they fit your car they will. You can always call them as I do to confirm fitment if your unsure of website details. Sometimes it's cheaper direct calling as some smaller company's use third party hosting and have to pay them a fee.
-
-
can these rubber things be replaced one at a time ? what is the difficulty in this type of operation, mine are a bit crunch looking underneath,,,,is it best to put it on a lift or just on a jack,,
-
-
You can change the bottoms with the car all together. To change the tops, the body has to be lifted off the frame. The fenders will need to be removed to do so.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
