Thanks to Jason making a 900 mile trip thru Illinois, I am moving forward with pulling the trans on my Fleetwood and replacing it with the one Jason is bringing for me!
That being said, I’ve already been in contact with Fatsco to order some of the other seals I’ll need. Fatsco did NOT have the trans mounts however.
Since the mounts will be accessible while the trans is out of the car, might as well replace on those. Where would be a reputable source for these mounts?
Further, how do I ensure everything is lined up properly? Are there shims needed as well? Is there a guide that I should follow?
As always, thanks for the help!
Tags:
You can get the rear mount at CaddyDaddy.com It is a better mount than the stock one. Same shape and size, but engineered better so it wont collapse like the originals.
The trans has guide pins and will self align to the engine. The rear will almost take care of itself, just have the mount bolts centered in the bolt holes.
Would engine mounts be more accessible during this operation as well?
Started by Doug Scarrow in For Sale 20 hours ago. 0 Replies 0 Likes
Just listed. https://www.ebay.com/itm/266786607755Continue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 21 Replies 1 Like
Neither of my cornering lights are working. I started by focusing on drivers side. I removed the entire assembly and cleaned it up, replaced the wire to the socket, cleaned and lubricated the socket…Continue
Started by Doug Scarrow in For Sale on Thursday. 0 Replies 0 Likes
just listed solid 1963 1964 non tilt steering wheel. https://www.ebay.com/itm/266784089004$120 plus shippingContinue
Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Wednesday. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 0 Likes
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 0 Likes
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment 0 Likes
My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns.
There is a restoration service called The Horn Works who my son…
Continue© 2024 Created by Jason Edge. Powered by