I have a 63 and for some dumb reason, Cadillac decided to make the fin lights running lights only that year. I retrofitted mine with LED strips to fix that design problem : )
Tags:
Comment
I thought I took more pics when I did this mod but only found these. I got the LED strips at Fry's locally but that store is closed now. From the pic, it looks like the P/N# is B42LSM1 but not sure if they are still available (mod was a few years ago). There are several LED strips on the market now. These are 12V red flexible, self-adhesive LED strips. You can cut them to length every 3 LEDs. I believe I bought one long strip & had enough to do both fins with some left over. As for wiring, I grounded each strip to the light socket in the fin and drilled a small hole to route the other wire to the brake light for each side. Brake light wiring is easily accessible inside the trunk.
The running lights in the fins still operate as designed. The LED strips only light up with brakes or turn signals.
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Phillip Hill 10 hours ago. 8 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark yesterday. 4 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Started by Doug Scarrow in Wanted to Buy. Last reply by Dennis P. DiBari on Saturday. 3 Replies 0 Likes
for close to 20 years I have had a lovely Club Decal on my windshield now I wish to replace the windshield and would love to buy a decal if any one has one available See attached photosContinue
Started by Jordan Johansen-Moe in 1963/64 Cadillac Specific Discussion. Last reply by Jordan Johansen-Moe Jun 17. 2 Replies 0 Likes
Is anyone here planning on going to the Back to the 50’s car show in Minnesota?
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website