Tags:
Pick up Cadillac Tim (Groves) 1964 Comfort Control Trouble shooting guide. He is listed in our Parts Suppliers Page. I believe Russ also sells them for Tim. And of course you will want to have the shop manual.
I had smoke come out of the dash once when I had my lights on, radio on and AC on at the same time. it happened because one connector on my ignition switch came lose causing it to arc,in turn the plastic piece on the back of the ignition switch & the coating on the wire began to burn from such a high demand from running all three electrical devices at the same time.
I did what Tony said, turned it on, smelled the burning, saw the smoke, found the source of the smoke ( grabbed the wire, it was hot as hell) took the switch out, squeezed the contact with a pair of vise grips ( making the connection tight again) back in business !!!!
Bob I have a similar issue, probably many more but that is one of them. My connector looks like it has melted in the past and someone wrapped it up in tape. When the fan runs (currently runs even when the lever is in the OFF position, another one of my problems), the connector gets very hot. Was it as simple for you as ensuring a tight and clean connection?
[img]http://i.imgur.com/UclxuqN.jpg[/img]
Yes, I have the AC book, by Tim Groves. I'm an authorized distributor for his book. Same price as he sells them. I include a spec sheet, as to where to locate the individual parts.
First you should get the Comfort Control Troubleshoot guide by "Cadillac" Tim Groves. You'll get step by step instructions on how to repair the entire system. I was able to get my Comfort Control system up and running with the help of the guide.
The smoke I had coming from under the dash turn out to be a a bad blower motor and a corroded connector. The high current draw of the blower motor in conjunction with the bad connector caused the wires to get very hot and melt causing the smoking condition. I hope this helps.
Kenneth Barton Online
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Tony Prichard 54 minutes ago. 4 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Bobby Brown in General Discussion. Last reply by Tony Prichard 59 minutes ago. 7 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton yesterday. 2 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles yesterday. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by