"Here is the picture of Chapter Member Frank Starks interior. I think this is one I sent you earlier today via text. Click to enlarge. Note it has the correct 4 buttons in front and back each side with elongated diamond pattern. "
Larry Rees's Discussions
64 cadillac deville convertible interior
Started this discussion. Last reply by Jason Edge Dec 2, 2024. 1 Reply 0 Likes
Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue
Wiper motor replacement
Started this discussion. Last reply by Larry Rees May 25, 2024. 2 Replies 0 Likes
Replacing my wiper motor and now looking through a small access hole at a clip holding the motor to the arms. Hi do I remove the clip? Pull out or up? Do this through the small access hole or need to…Continue
windshield wiper/washer issue
Started this discussion. Last reply by Jason Edge Apr 24, 2024. 9 Replies 0 Likes
I have a 64 Cadillac Deville convertible. When the wiper switch is turned on the washer pump activates continuosly no mater what speed is selected. Washer pump shuts off when wiper switch shut off.…Continue
40A CB in fuse box
Started Apr 16, 2024 0 Replies 0 Likes
Don’t know if this is common knowledge or easy to find but was able to order a 40A Circuit breaker to fit in the fuse box from Crimp Supply inc or on Amazon from the same company source. Just thought…Continue
Larry Rees's Page
Latest Activity
64 cadillac deville convertible interior
Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the original pattern with the return shipment. Can anyone send me straight on pictures of the front and rear seat if you have the original pattern. My car is a 64 Deville convertible with a front bench seat. Thanks in advance for taking the time. My email address is: larryrees64@gmail.comSee More
"Thanks Jason for the tips. The removal went well doing it that way. Larry"
"I think you can get to that clip from the plug at top, but I always just unscrew the 3 screws holding the wiper motor assembly to the firewall, and pull that rear section forward enough to get a small serrated nut that holds the lever to back of the…"
Wiper motor replacement
Replacing my wiper motor and now looking through a small access hole at a clip holding the motor to the arms. Hi do I remove the clip? Pull out or up? Do this through the small access hole or need to remove the wiper arm chrome shroud? Tool recommendations? All tips are appreciated. Thanks LarrySee More
"That is great. They are getting harder and harder to find. If anyone else needs the inner hi beams I have 6 and they are $15 each for Chapter Members."
"Thank you Jason. I ended up ordering one from Russ."
"Larry, The wiring terminal configuration is in your 1964 Cadillac Shop Manual on page 12-60, Fig 12-83. See inserted pictures below of that illustration, a picture of my 64 wiper assembly, an illustration with ground strap then a picture…"
"Hi Larry,
Please send me your email address and I will take some pictures of the ground strap and any wiring to the windshield washer pump, etc. I'll take some pictures with my wife's iphone and scan and email…"
"And whether the connectors are plugged in the right way at pump/ motor. Do you have a pic of connector orientation"
"Got switch working better but still same problem happening. Checking continuity on the wires now."
"Larry, the wiper switch is self grounding by the 2 mount pins. Glad to hear you got it working again. "
"Thanks Russ for the information. Where do i look for the ground connection at the switch shown in the manual? Does it just ground when switch installed to the metal or is there a connection which i can see? You were right about the switch sticking.…"
"Thanks Dennis for the information. Would you have a picture of the copper ground strap placement that runs from the washer motor to washer pump? Also any pictures of the colored wire connectors going into the motor and pump so i can make sure…"
"Tony, Larry had been waiting a long time for good outer T3 and was next up on the Wait List. I have one other Chapter member on the list after Larry, so you would be #2 in line after Larry gets this one. I assume you need one outer T3.I…"
Profile Information
- Do you own any 1963 & 1964 Cadillacs? If Yes, Year & Body Style
- 64 convertible
- Cadillac LaSalle Club Membership Number? (Must be a member to Join Chapter & Website)
- 30410
- 1963/64 Cadillac Chapter Member?
- Yes
Comment Wall (1 comment)
- At 2:07pm on December 12, 2020,
Jason Edge said…
Hi Larry, It is great to have another Chapter Member join us here on the 63/64 site. It is even more of an honor to have this month's feature Caddy and Caddy Owner join us. Please take a bow, and join the fun! Jason.
Members
Forum
Houston we have a problem!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 13 hours ago. 5 Replies 0 Likes
While enjoying the fruits of my labor on all new rear suspension and…Continue
Brake Booster not enough compression
Started by Rick Yasenchack in 1963/64 Cadillac Specific Discussion yesterday. 0 Replies 0 Likes
I bought my 63 2-door convertible 62 series a few years back, previous owner said a new brake booster was just installed and that was why brake pedal was a rock. Did not know.Just had engine…Continue
Commercial Chassis Dual Battery Tray Questions
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Meet-Up of 1964 Cadillacs in downtown El Segundo Car Show August 16
Started by Jason Edge in Chapter Discussion on Tuesday. 0 Replies 0 Likes
Chapter member Alan Clark and owner of a 1964 Eldorado sent this and wanted to share with everyone in case there are others nearby that might want to attend:"I'd like to invite the 63/64 chapter…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
