1964 Cadillac 429 HydraMatic Long Block Running Engine - $800 ($600 for Chapter Members)

Click Here for many more pictures on my Facebook Parts Page.

I have a 1964 429 engine with the HydraMatic Crankshaft pulled from an running 1964 Cadillac up for sale.
Owner was doing an LS Swap and lived nearby so I picked up the running engine and shifting transmission.

CONDITION. The owner said this engine ran well, had no issues, but wanted a modern powerplant.

ENGINE RUNNING VIDEO LINK: https://www.facebook.com/share/v/16XLdN179s/

From my experience IT IS IN EXCELLENT CONDITION. No bolt broke removing any of the manifolds or front engine cover, all nylon is on the camshaft timing gear, and it is just a clean smooth turning engine!

FITS: 1964 Cadillacs with the HydraMatic Transmission (ie. Series 62, 75 Series, Commercial Chassis only). DOES NOT FIT the other 1964 Cadillacs with the Turbo HydraMatic transmission. This is due to the different raised mounting area on the back of the crankshafts for the HydraMatic (3 3/16") vs the Turbo HydraMatic (3").

ALSO FITS: 1963 Cadillacs, but you need to use your 1964 external parts.

HAS HYDRAMATIC CRANK NEEDED TO DROP INTO A 1963 CADILLAC REPLCING THE 390. Simply swap your externals over to this engine. Many of my customers ask if a 1964 429 will bolt into their 1963 to replaced the 390.

PRICE: $800 ($600 for 1963/64 Cadillac Chapter Members)

DUE TO SIZE AND WEIGHT, PICKUP OR SHIPPING BY CUSTOMER.
www.EngineShipping.com is a good source for transporting these, as they have picked up many engines for my customers over the years. These are about 410 lb. If you go with a transport company, they will usually require the engine strapped down to a palate. I charge $75 to prep the engine for transport. This includes providing a palate, and materials to securely strap the engine down to palate and wrap in tarp or other material.

My Address is 104 New Rand Rd, Garner, NC 2752, which is about 10 miles SE of Raleigh, NC and is only 2 miles form Interstate 40, 22 miles from Interstate 95, and 32 miles from Interstate 85 as they cross through NC. If traveling through NC and need a transmission you can save a lot on shipping if you stop by in person.

I CAN DELIVER ... SOMETIMES, If you are not too far from me, or in route to one of my traveling destinations. Ask if you are not sure.

EMAIL ME at jasonedge64@outlook.com

Views: 74

Reply to This

Photos

  • Add Photos
  • View All

Forum

Dino Diaries - July 11, 2025 - Busted!

Started by Jason Edge in General Discussion. Last reply by Chris Codd 36 minutes ago. 3 Replies

So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Getting hot when going fast…

Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies

So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service