OK the speedo is off by 9 miles an hour after I put on the radial tires I have a pink gear which I think is 35 teeth so it looks like I need a 38 tooth blue? Another issue I have is a gas smell coming from the rear of the car no leaks I have cked it 3 times no leaks is that tube that hangs off of the rear of the gas tank with the loop is that supposed to have piece of foam or a ck valve in it Mine has none. 3rd when I put 4 people in the car it bottoms out on speed bumps I was thinking of putting some monroe air shocks in the rear just wondering if someone has done that. Thanks
Tags:
Mark, It might be better to split these items out in to 3 topic discussions as they are very different and following one topic thread can sometimes be a challenge, much less three!
I will take a stab at the speedometer being off. There is no indication that it has been replaced, but with being 9 mph off (I am assuming at 55mph??.. it will increase as you increase speed), I am guessing the transmission has been swapped out with one with a speedo gear for the "other rear end"?
For your deVille convertible which came with a Turbo HydraMatic the two speedometer gears per info on our Rear End Differentials: Gear Ratios, Controlled Differentials and S... Help Page would be as 40 teeth gear for the 3.21 rear end differential, or a 37 teeth gear for the 2.94 rear end differential:
-64 Turbo Hydramatic , part # A148 1859 axle ratio 3.21, 40 teeth
-64 Turbo Hydramatic, part # B135 9271, axle ratio 2.94, 37 teeth
First confirm the transmission in the car, then confirm the gear ratio of the differential. That same help page will show you a "1" stamp on differential front carrier means 3.21 gear, and "2" means 2.94 gear.
Whatever you have it sounds like you need the other and I should have either one on hand.
Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari 2 hours ago. 1 Reply 0 Likes
I casually mentioned during our Zoom meeting Sunday that there are notches for using the gas cap to hold the license plate door open while filling up and a couple of members indicated they did not…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 23 hours ago. 28 Replies 0 Likes
I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle yesterday. 12 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
I always get a kick out of the expression when someone asks how many…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes© 2024 Created by Jason Edge. Powered by