63 De Ville trans dip stick tube
I'm looking for the transmission dipstick tube for a 63 DeVille.
Replies to This Discussion
-
Permalink Reply by Russ Austin on
-
I have a dip stic tube, please email me at russ@thecadishack.com
-
Permalink Reply by Jason Edge on
-
I have several with a broken bracket where they attached to right rear exhaust manifold bolt. They are Free for any Chapter members ... just pay shipping. You can make a bracket by taking a strip of galvanized roof sheeting metal or other material and cutting a strip about 1" x 8" and drilling a 7/16" hole for exhaust bolt near one end and curling the other end to find around the pipe. This is basically the setup of the 1964 THM transmission dipstick tube. If you can find one with a good solid bracket that of course is the best bet.
Photos
Members
Forum
Cadmium Plated Front and Rear Bumper End Fastener Sets
Started by Jason Edge in For Sale 1 hour ago. 0 Replies 0 Likes
I will start grouping some of my fastener sets and thought I would start with the bumper fasteners. These have links that point to photo albums on my Facebook Parts Page at…Continue
Windshield washer pump inoperative
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Saturday. 14 Replies 0 Likes
I have spent a few hours trying to get pump to pump fluid. The lines are all clear, The pump Is working as it should when the washer button is pushed. I have a spare wiper motor assembly which I have…Continue
63 vs 64 Hood V Size Difference
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Saturday. 0 Replies 0 Likes
The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about…Continue
Radio Models 1963 to 1968
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies 0 Likes
I sometimes get asked what radios were used in 1963 and 1964 or verification of a radio model number, so I scanned the radio listing from a 1968 Master Parts Book that covers 63 to 68 which covers…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Events
Videos
© 2025 Created by Jason Edge.
Powered by
