The 64 hood V is considerably bigger than the 63 hood V, and one of the many things I have not done in dealing with these cars on the last 3 decades was to do a direct comparison. Someone asked about the difference a couple days ago so I finally put them size by sized and measured. This is useless information for most people on the planet but thought I would post these specs for the curious minded!
Here are the Specs:
- Tip-to-Tip: The 63 V is 8 1/8" wide. The 64 V is 9 5/8" wide.
- Diameter at center: The 63 V is 15mm wide at center. The 64 V is 19 mm wide at center.
- The mounting pins are different with the outer pins further spread out on the 64 Hood V.
So the 64 is considerable bigger.
Here are the pictures:
Tags:
Started by Donald Swenson in 1963/64 Cadillac Specific Discussion. Last reply by Donald Swenson 8 hours ago. 2 Replies 0 Likes
Hello,Just wondering if anyone has photos to where I need to apply new SEM seam sealer on the front of the fenders to the inner top Cowl area and the corners of the Radiator support?I am in the…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 9 hours ago. 2 Replies 0 Likes
I was watching a YouTube video (I'll attach it below) of a 1964 Fleetwood 60 Special revival and I noticed it was equipped with a rear defrost option (as well as nearly every other option for 1964…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 9 hours ago. 8 Replies 0 Likes
The wintertime blues are hitting hard as 3-6" of snow is forecasted for later this week. Share your favorite photos of your 63 or 64 Cadillacs! Spring/Summer/Fall cant get here soon enough!Thanks for…Continue
Started by allen dilley in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 2 Replies 0 Likes
My 63 Park Avenue has a leak at the differential. My accomlished, experienced, and reliable mechanic has never replaced a seal of this type. I have a pinion seal and differential gasket. I also…Continue
Tags: Replacement, Seal, Pinion
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
February 23, 2025 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by