My power antenna motor operates in both directions, however the mast doesn't raise or lower, although I can do it manually.  For the time being, I have disconnected the motor.  I recall reading about a guy who replaces the unattached/broken cable in these units.  The price was very reasonable, and I believe he was in TN somewhere. I'm also sure that the link to this person was on this website, but have been unable to find it.

I am thinking about placing this Caddy with a classic car consignment business, and I want everything to be working properly.  I absolutely love the car, and have just ordered the correct green rubber OEM-style floor mats for it. Unfortunately, another unique Cadillac that I have been interested in for years just became available, but I have no room in my garage for both of them. 

Views: 206

Reply to This

Replies to This Discussion

Caddy Daddy has the replacement antennas. 

Thanks Tony and Russ for your replies.  Russ, I had already seen that Caddy Daddy has the replacement mast-only setup, but the accompanying you-tube video on how to mate it up with the rest of the unit is a little too complex for both my skill level and luck. They will do a total rebuild for $299, but I don't believe I need that, since the motor is still working properly, and the cosmetic repainting of the hidden unit is not important to me. 

I know the person who just offered the service of replaced the broken or disconnected nylon cord was less $ than this, but I still can't find that resource, and I have checked other sites that I infrequently visit.  I suspect that I will end up paying for more work than I actually need in order to get this fixed. 

That video is showing a complete rebuild. If you buy a mast you don't need to rebuild everything, just remove the old broken mast and install the new. It winds in a cup adjacent to the motor.
The point being if you get a new Nylon cord installed on your old mast you will still have to mate it to your old motor assembly.

Just to add, if anyone IS doing a complete rebuild I do have a large set of mast tubes being cad plating for a like new appearance. Just one of the many items that I am having cad plated while I can.

HERE is the Caddy Daddy Link. I am surprised they don't want Carl Sagan money for it. $139 is not that bad. USA Parts sold them for $99.50 in 1995.

I can rebuild your antenna for 175.00 plus return shipping.  The new mast will be installed and the gears will be lubed. 

Just send me an email to; russ@thecadishack.com  to get started. 

Thank-you, Russ.  My plan is to remove the assembly from the car today.  When that is done, I will get in touch with you.

RSS

Photos

  • Add Photos
  • View All

Forum

Pick Up of 11th Batch & Drop Off of 12th Batch For Cadmium Plating

Started by Jason Edge in General Discussion yesterday. 0 Replies

As I shared last night in our Chapter Zoom meeting, here is a picture of the 9 totes with fasteners and other parts that will be taken to Winston-Salem NC for cadmium plating. This will be my 12…Continue

Which Shocks for my 64 SDV are MOST like Originals?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman yesterday. 4 Replies

I am considering replacing the shocks in my 64 SDV. They're not terrible, but are a little too wishy-washy. I want to replace them with shocks that most closely approximate the original damping rate…Continue

Dino Diaries - A Blast from the Past - 1967 to be Exact!

Started by Jason Edge in General Discussion yesterday. 0 Replies

I love discovering new thing old things about my 64 Coupe de Ville. I bought the car on Nov 13, 1996 from Robert Jessup who lived in Raleigh, NC. The car had some unique early history having first…Continue

Dino Diaries - Feb 22, 2025: Go for the Gold!

Started by Jason Edge in General Discussion on Saturday. 0 Replies

While scooting around under my 64 CDV Dino I am seeing a lot of thinks to address, including swapping in a lot of my gold cadmium plated hardware. Since I am headed to the cad platers in…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 5 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service