A Little Bit More Cad Bling to Dino Today
I have generally been installing the cadmium hardware as I go on my 64 Coupe de Ville "Dino" and using it for posting pictures but have a few items I never got around to. I installed the cad plated fender skirt brackets on one side as it rained outside. Here's a quick view of the one side I did:
Replies to This Discussion
-
Permalink Reply by Michael Forte on
-
Mine are covered in undercoat and road grime. Who knew they could look so good?! Nice detail!
-
Permalink Reply by Jason Edge on
-
Yep, mine had the road grime and undercoating also. What I noticed and guess I knew since I have parted so many out there is quite a bit of in and out and up and down adjustment for the skirt with these brackets. I was able to pull mine out a bit and line up the skirt to body line a bit better as I installed the bracket. I assumed this would be the case and one reason I wasn't in a big hurry to just throw the brackets on there. You have to savor and take advantage of these slight upgrades! LOL
-
-
Just to add... many understandably feel compelled to go replaced their tired, dulled stock hubcaps (wheel covers) with spoke wheels, etc.; however, with nice original covers and center caps, I have always thought these were gorgeous wheel covers. Yes, I am a bit biased.
Photos
Members
Forum
!964 Deville Front Bumper
Started by Patrick Westphal in For Sale. Last reply by Jason Edge on Monday. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Which are best Shocks for 64 that are closest to Original in Ride Quality?
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman on Sunday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Sunday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
© 2025 Created by Jason Edge.
Powered by
