bulb for door handle 1963 Cadillac
My lights in the side door panel are out on the driver and front passenger side of my 63. The back lights work on the door side panels
Do you know where I might get bulbs and what I would reference to obtain those parts.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
Hi David, They are a #212 bulb and available at Wal Mart, Amazon and most auto parts stores. If you don't have a store nearby I have them new for $2 each, or $4 for the pair which drops to $3 with Chapter Discount. I can ship 2-3 day Priority for $10 for a total of $13. If interested shoot me a PayPal to jasonedge64@outlook.com. If you need an invoice sent email to me at same jasonedge64@outlook.com.
-
Permalink Reply by David Erickson on
-
Thanks Jason. I will try here first and if not available will order from you. Are they hard to install? I am a novice at repairs.
-
-
Disconnect battery and gently pry the lens cover off with a very small screwdriver or jeweler's tool.
-
-
Thank you Jason. David
Photos
Members
Forum
Clock Removal
Started by Jeff Donaldson in General Discussion. Last reply by Jason Edge 15 hours ago. 2 Replies 0 Likes
Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue
Dino Diaries - All Jacked Up For Christmas!
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Power Brake Booster
Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf yesterday. 13 Replies 0 Likes
Hello Co-Members,I recently purchased a low mileage1963 Sedan Deville Park Avenue. It is extremely solid and runs well. Neverthelss, it has minor problems that need to be addressed before I can…Continue
Body side molding install help needed
Started by Wayne Morris in 1963/64 Cadillac Specific Discussion. Last reply by Wayne Morris on Saturday. 6 Replies 0 Likes
I am in the process of trying to install body side molding. I have completed installing the two front fender pieces and now trying ti figure out the rest.…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
Videos
© 2024 Created by Jason Edge.
Powered by
