Hello, I now own my grandfather's '64 Sedan DeVille with a 490ci Carter 3903S carburetor. My more mechanically-inclined friend and I are troubleshooting some carburetion issues that came up. In 2016, we rebuilt the carburetor with an AutoZone GP Sorenson Carburetor Kit 96-568 (https://www.autozone.com/fuel-delivery/carburetor-kit/p/gp-sorensen...) with improved carburetion results at that time. The link has a picture that is more clear than the image I was going to attach. At that time, we left the gasket (which we now know was a Fel-Pro 60034) that was touching the intake manifold alone. Replaced all other gaskets with what we believed to be correct from the kit.
Recently, we decided to rebuild it again for a number of reasons (starting that required 5-6 pedal pumps to prime, reduced power, bogging on quick acceleration from dead-stop) with a Mike's Carburetor Kit K4011 (https://www.carburetor-parts.com/k4011.html)
After reading Jason Edge's post from here, he states "For the Carter AFB I sell the Fel Pro 60034. It takes 2 of these gaskets, one below and one above the insulator."
Neither of these two Carter labeled carburetor rebuild kits include the 60034 style gasket. Jason's pictures comparing the Carter to the Rochester show two differences. Here is the 60034 carter. Red ink shows the areas that are missing from Rochester.
My friend and I are very confused and initially believed that the kits we bought were correct but according to Jason Edge the gaskets those two suppliers include are not for THIS Carter apparently.
Can anyone provide some insight or direction as to who is correct? If Jason is correct then we should be following this pattern:
Intake Manifold --> 60034 gasket --> insulator spacer --> 60034 gasket --> metal shim --> carburetor
Thank you,
ROB
Tags:
Thank you Jason and Tony/Ginny for your replies. We found the 60034 gasket through Napa Auto Parts. I just don’t get why the “Carter” labeled kits from those two suppliers wouldn’t include them
Someone just obviously mixed things up when they were putting the kit together. Other than the many gaskets I have seen first hand from the 56 and counting parts cars, is the fact the Rochester listed FelPro gasket says it replaces 147 7371 on the packaging and looking at the Cadillac Master Parts book, that is the original # they list for the Rochester with the Carter having a different #. To me that is a double check confirmation of which is which. Also, just for reference the original Carter gasket was part # 147 7370.
I think I’ll contact Mike’s Carburetor and let them know of the issue with our Carter’s. Great. Thank you for that info Jason. I find that detailed info like this is so valuable.
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal on Friday. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari Jul 21. 4 Replies 0 Likes
I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack. Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler Jul 21. 12 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by