Gentlemen,

Friday morning began with the dash painting complete. I spent the next day and a half putting the dash and instrument panel back together along with an upgraded radio and speakers. The rebuilt radio works and sounds great! It works like the original, with a new amp and bluetooth.  It’s fantastic! 
I changed the panel bulbs to high intensity halogen ones. At night, the instruments appear clear and bright. 
It was a slow process that tested my patience, but I stayed calm and focused and got it done by Saturday mid day.  It looks great and was so worth it!  I also rechromed the arm rests control bezels.  
Mike

 

Views: 98

Reply to This

Replies to This Discussion

Hi Mike,

     You did a fantastic job on your dashboard and radio renewal.  The pictures you posted look great.  Quite a bit of work that deserves a lot of credit!

Dennis DiBari

Thank you,Dennis.

This was my first dash rebuild and I was a little anxious. But, I figured, “How do you eat an elephant? One spoon at a time.”  I took my time, and stopped when I began to feel frustrated and tired. The dash came together as it should have with just one little squawk: the top switch failed.  Otherwise, I’m very pleased with the outcome.

Mike

Mike,

     Encomium to you!  I never tackled an entire dashboard, and you deserve so much credit.  It turned out great.

Dennis DiBari

Nice! Do you have any video of how to remove the dash top?

Thanks

RSS

Photos

  • Add Photos
  • View All

Forum

Which are best Shocks for 64 that are closest to Original in Ride Quality?

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman 5 hours ago. 5 Replies

Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue

1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 5 hours ago. 1 Reply

Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 7 hours ago. 2 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Finally got around to cleaning and re-lubricating the seat transmission. Now, it works flawlessly

Started by Norman Silverman in 1963/64 Cadillac Specific Discussion on Friday. 0 Replies

When I first got my 64 SDV about 8 years ago, the power seat made noise but didn't go anywhere. I promptly read up on it and proceeded to take the seat transmission out to clean and re-lubricate it.…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service