I always get a kick out of the expression when someone asks how many miles are on my 64 Cadillac "Dino". Given the nice condition many expect the hear some low number, however, when I blurt out 165 thousand miles I sometimes get a deer in the headlight look.
What got me thinking about mileage is two days ago a guy come running out of the store where I got the high octane gas asking the mileage. He couldn't believe 165K miles. He really, really couldn't believe the miles when I popped the hood, but did confirm the engine was rebuilt 12 years ago.
I was also thinking about mileage this morning as I was changing the oil in my 2002 Escalade EXT "Brutus". I have an Excel spreadsheet where I record all car maintenance for all of our cars, and noted its mileage was 166,565 .... very close to Dinos! I bought that 2002 in 2004 with 22K miles so I have put the majority of the miles on it, being my daily driver for 18 years.
My 2013 Escalade EXT "Et2Brute" is in the paint ship getting the front clip repainted as it was starting to show some age and that Xenon Blue had been touched up one time too many!
Anyway, perhaps if you read this you can share your cars mileage!
Tags:
My 1964 Fleetwood, whilst not as nice as Dino, supposedly only has 60,XXX miles on it! I purchased it with 52,XXX miles, so I have got some time behind the seat for sure! And I have loved every minute of it! Part of me wonders if it has rolled over, but the title has never had any issues that I can find and I can verify mileage pretty far back, but as you mentioned, miles really doesn't matter if its cared for and fixed PROPERLY.
For some reason, I am still apprehensive to take it on longer trips, yet in those 8k miles, it hasn't left me stranded ONCE. Except for when I ran it out of gas about a month after I brought her home! But that's my fault, not the cars!
Logan, It very well could have been an original 52K tire. A pretty much sure fire way to quickly tell if it is a 52K mile versus 152K miles to to look at the rubber and stainless steel trim on the brake pedal. At 52K you will have some wear on the rubber, but at 152K the rubber is usually worn smooth on right side and often the stainless is worn thru. Parts cars I have brought in that I know are say 125K or more have always had smooth-ish rubber on the right and again often wearing thru that the stainless trim, again on the right side. You could have a gentle pedal pusher owner but that break wear has always been a good indicator.
If you have the front of the engine off and see the camshaft mounted timing gear it should still have all the nylon coating on the gear teeth; however, at 152K they are usually starting to chip apart. Other indicators would be excessive wear on the driver side front seat, and just general wear and tear in generally.
Started by Jason Edge in Newsletters. Last reply by Matti Roth on Monday. 2 Replies 0 Likes
I have just completed and posted the March 2025, 1963/64 Cadillac Chapter Newsletter to our…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Monday. 6 Replies 1 Like
I have made some "factory" upgrades to my 64 Coupe de Ville by installing some options available to my Coupe de Ville such as power vent windows, tilt steering column, am/fm, 3 way rearview mirror,…Continue
Started by Alan Grst in 1963/64 Cadillac Specific Discussion Feb 28. 0 Replies 0 Likes
Greetings, I have a set of Kelsy Hayes Sabre Wheels # 38612. Will these fit my '64 sedan? Do I need to make any modifications?Thanks!AlanContinue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
© 2025 Created by Jason Edge.
Powered by