Hello All

I am going to get my front drums turned/machined but want to know if the hubs have to be separated from the drum before I bring them to the shop?

Thanks

Norm

Views: 57

Reply to This

Replies to This Discussion

No, take the whole assembly to the auto parts store. Ask them if the bearing needs to be removed.  I would recommend it to keep trash out of the bearing. 

Thank you, Russ.

There is a brake lathe at one of the shops where I work. Just machined my drums myself Thursday. Like Russ said, you do not remove the hub. Whoever is turning the drums for you will have adaptors to chuck up the drum to the lathe. You do need to remove the seal and bearings. You don't have to but I would clean out the grease inside the hub as well. 

Find a machine shop that can do the hub with drum. Not all shops that turn drums have the adaptors to turn with hub in place. I know because I have to drive an extra 4 miles to get mine turned.

Remove the Grease Retainer (seal) and bearing. Do not remove the cub (race) that the bearing seats against.  I remove the old grease as a courtesy to my customers.

For years I kept turned front hub and drums on hand but had run out a year or so ago. In the last week I had 4 sets (8 hub & drums) turned, and all where shipped out as of yesterday. I have 2 more front sets at the machine shop  ready to pick up tomorrow, so if anyone needs the already turned I sell for $135 each. That drops to an $101.25 with Chapter Discount, but will go an even $100 for any Chapter member.

I also sell like new cadmium plated lug nuts for $1 each or $5 per hub & drum set. I have several hundred and can pick you out a like new set to replace those chewed up old ones.

Email me at jasonedge64@outlook.com

Thanks, Jason. I also bought 2 mew Delco drums but my shop said they were so out of round it didn't pay to use them. Too bad, because it is the rears that I need and they would just pop right on.  I also saw something you wrote about the new drums not fitting properly, what was that?

Norm

The balancing weights are recessed on the original drums. They are not on the new aftermarket drums ... or at least on those I had seen for the last decade or so. The protruding weights will not allow the wheel (steel rim) to mount up flush. I have a brand new set of drums I bought from AutoZone way, way back before I realized they were no good and am stuck with them as nice new very large paper weights.

I sell original rear turned drums for $95 each ($71.25 for Chapter Members). I currently have 1 set of rears on hand... but think I have more somewhere I need to find and have turned.

I will take them. 

Norm

RSS

Photos

  • Add Photos
  • View All

Forum

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 15 hours ago. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

64 cadillac deville convertible interior

Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Tuesday. 1 Reply

Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue

Dino Diaries - Power Vent Window Video Discussion

Started by Jason Edge in General Discussion Nov 27. 0 Replies

Here is a short clip after a cruise around town today, discussing optional power vent windows and an intermittent problem I have with my left power vent. Continue

2025 calendars are ordered.

Started by Russ Austin in General Discussion. Last reply by Russ Austin Nov 25. 2 Replies

The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service