Door lock vacuum
Hey folks. First post. I hope I'm doing it right. I currently restoring a 1964 Fleetwood 60 series Special. There is an egg shaped vacuum canister on the left side of the firewall behind the tire. It has a vacuum fitting with two connections. I am thinking one connects to a hose going inside the car. Where does the other hose go?CaddyVacCanPwrDoorLock.jpg
- Attachments:
Replies are closed for this discussion.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
It T's into the line that goes into the vacuum fitting on back of intake. This is it's vacuum source. Here is a picture of the power door lock & power trunk tank showing the feed hose going thru fire wall then the other shoots to the passenger side and T's into that fitting on the back of the intake.
-
-
Permalink Reply by Bill Hatfield on
-
If it were not for you Jason, I'd go back to building old Mustangs .. Thanks
-
Photos
Members
Forum
Lot of 24 - 1/2 ounce Cadillac Lincoln CAX Wheel Rim Balancing Weights 1960's
Started by Doug Scarrow in For Sale 12 hours ago. 0 Replies 0 Likes
These are the correct 50's and 60's CAX wheel weights for Cadillacs and Lincolns of that era they allow the Wheel Discs to fit properly there is a Lot of 24 half ounce GM part #1471452 Just…Continue
Dino Diaries - Power Vent Window Video Discussion
Started by Jason Edge in General Discussion 18 hours ago. 0 Replies 0 Likes
Here is a short clip after a cruise around town today, discussing optional power vent windows and an intermittent problem I have with my left power vent. Continue
2025 calendars are ordered.
Started by Russ Austin in General Discussion. Last reply by Russ Austin on Tuesday. 2 Replies 0 Likes
The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue
64 Deville Fuel Tank Sending Unit
Started by Jeff Tepper in Restoration Discussion. Last reply by Russ Austin on Tuesday. 1 Reply 0 Likes
HI all,I replaced my sending unit with a no name one off ebay and it is all over the place. It does not even attempt to have any accuracy.We may try to fix the original unit. Seems like we need to…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
-
December 15, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
December 15, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2024 Created by Jason Edge.
Powered by
