Anyone ever experienced the emergency brake pedal not locking in the "engaged" position. My pedal just springs back up - it won't lock when I press it. Everything else works, meaning the brakes engage, the pedal just won't stay down.
Tags:
Is that the case with the engine off? As you may know, the parking brake has a vacuum release that automatically releases the brake when it is not in Park or Neutral. The vacuum line comes from the Neutral safety switch. That said, the release mechanism could be malfunctioning. There is a manual release lever on the parking brake (push forward). You'll have to lay on the floor of the car to check everything out. It may just need to be lubed.
I pressed the pedal down this morning with the engine off and it stayed engaged. Once I started the car and put it in gear the E-brake popped up as it should. I just can't keep it engaged while thew car is running and parked for some reason.
A simple neutral safety switch adjustment may correct the issue. The adjustment procedure is in the shop manual (hopefully you have one). Not a terribly difficult job but you will be laying on the floor of the car reaching upward. You may want to remove the switch and clean and lube it. They do get brittle and crack as they age (like all of us do : ) There are a couple of Help topics on the NSS from the drop-down menu in the header of this page:
Tony is correct when he says "You can use the parking brake as an emergency brake—- if the brakes should fail and you push your foot on the parking brakes peddle ——to stop the car in a brake failure emergency." It serves as both a "park" brake and an emergency brake"
In fact it is stated right there in your owners manual: "Since the parking brake is always released when the transmission selector is in "Drive", "Low" and "Reverse" ranges, it may also be used as a fully controllable brake pedal, providing rear wheel braking only, under emergency or special conditions."
Thanks guys. Yeah, should have referred to it as the parking brake. Yep, when I first got the car the brakes didn't work so driving the car on and off the trailer I used the parking brake to stop the car. Once I rebuilt the brake system and had the car on the road the parking brake worked fine. It was just in the last few months that it failed to engage, and it's just something I figured I would try to fix.
Anders. Lighten up. Many of us on this side of the pond refer to Park Brake and Emergency Brake meaning the same thing... that "other" brake we need when we get in a tight spot when a good oak tree isn't available .... for sudden stopping or parked stopping. :-)
Started by Jason Edge in General Discussion. Last reply by Bill Wolf yesterday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by