I've discover the previous owner of my 64 reversed the locations of the muffler and resonator; the resonator is under the driver and the muffler is in the rear. I've just received a new system from Classic Exhaust in Ohio but it came without hangers. My question is where can I find the original style hangers for the exhaust system?
Facebook Facebook

Views: 291

Reply to This

Replies to This Discussion

I have some of the stock hangers.   Shoot me an email to;  russ85747@hotmail.com   Not sure of a new source though.

Bob I puchased the same system I believe from eBay. If your doing it yourself don't slide the pipes into each other to far and it'll go on fine. You will need two people to make the job easier or you can slowly snug up each pipe clamp so it will hold in place as you adjust it but still not move.

I will say I'm not totally happy with the sound as I find its a bit loud and the resonator is a homemade job. I was looking for stock replacement for quietness and it is far off.

I looked up waldrons exhaust on line. That would be great if they had new pieces.  I didn't see hangars specifi for the 63/64, but it was late, and one would need to call them.

So I called Waldron’s Exhaust and they do have new OEM style hangers. They have very few in stock and get from a third party when needed. I order a set which should arrive in 2 weeks.

Are you talking about the entire bracket assemblies are just the U bolt, 2 nuts and cradle clamp. the complete hanger assemblies are quite different and quite elaborate.

Here is the first bracket assembly behind the muffler:

And here's the 2nd  toward the center:

Here is one showing the rear section

I specifically asked for the 3 hanger assemblies as shown in the pictures and they said they have them for the muffler, center and the one in the rear at the resonator. We'll see what shows up at my doorstep in about 2 weeks.

Let us know if they are an exact reproduction. I might get a set for my Caddy.

That's great to hear. Hopefully it will be a good setup.  Please keep us posted with pics.

Jason, thanks for the original pics.

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

64 Replacing dash illumination lights-how much has to come out to get to all of them?

Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies

Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service