Thanks to Jason's expert advice, I was able to remove the fender trim on my 63 de Ville without removing the fender. Pics contain the locations of the 3/8 in nuts and how to access them. My clips were trashed so I ordered 10 from Jason. He has the new once with nylon nuts. 

Views: 84

Attachments:

Reply to This

Replies to This Discussion

Wow! Those are great Visuals.  We might use this for a future Tech Tip Series on removing trim.

If you don't mind I am going to insert here in the reply to see all at once:

Forgot to mention removing the front wheel to easily access the wheel well bolts. I put the wheel back on to lower the lift and roll it backwards to get the door fully open to access the hinge panel.

And to do a little self-promotion, here is a picture of the medium sized trim fasteners with bonded washer and nylon lock washer, used on front fender, rear qtr, and inner door section (of you want to replaced that snap on inserts). I sell these for $3 each ($2.25 after Chapter Discount).

Jason,

     Keep me in mind for that passenger side trim for my 64 Series 62.  I had it off in the winter and want to replace it if you come across one.  Pretty sure you have me on the wait list.  I have all the access points ready; just need the trim.

Thanks,

Dennis DiBari

RSS

Photos

  • Add Photos
  • View All

Forum

What To Do With Those Damn Coil Springs?!

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari yesterday. 4 Replies

Coil Springs is one part I generally do not sale (who wants a tired used coil spring), but it is also one of those items I just can't let go up. I have painted them, stuck lights in them, put them…Continue

Too Cold to Do Much with Dino Right Now

Started by Jason Edge in General Discussion on Thursday. 0 Replies

North Carolina can be pleasant in the winter, with temps mild (60's/70's in the day and 40's and 50's at night); however, yesterday when I got up it was 20, and the has been in the mid 40's, Today it…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Thursday. 1 Reply

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

64 cadillac deville convertible interior

Started by Larry Rees in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Dec 2. 1 Reply

Hello everyone. I am trying to sort out a interior order that came to me with the wrong diamond pattern and no buttons. They are going to fix it but I would like to include some pictures of the…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service