Thanks to Jason's expert advice, I was able to remove the fender trim on my 63 de Ville without removing the fender. Pics contain the locations of the 3/8 in nuts and how to access them. My clips were trashed so I ordered 10 from Jason. He has the new once with nylon nuts. 

Views: 117

Attachments:

Reply to This

Replies to This Discussion

Wow! Those are great Visuals.  We might use this for a future Tech Tip Series on removing trim.

If you don't mind I am going to insert here in the reply to see all at once:

Forgot to mention removing the front wheel to easily access the wheel well bolts. I put the wheel back on to lower the lift and roll it backwards to get the door fully open to access the hinge panel.

And to do a little self-promotion, here is a picture of the medium sized trim fasteners with bonded washer and nylon lock washer, used on front fender, rear qtr, and inner door section (of you want to replaced that snap on inserts). I sell these for $3 each ($2.25 after Chapter Discount).

Jason,

     Keep me in mind for that passenger side trim for my 64 Series 62.  I had it off in the winter and want to replace it if you come across one.  Pretty sure you have me on the wait list.  I have all the access points ready; just need the trim.

Thanks,

Dennis DiBari

are these clips used for the center three holes of the door molding/

They can be, but is not factory and is one of 3 attachment methods I recommend. I could go on but will repeat myself. See my detailed reply on your Body side molding install help needed thread.

RSS

Photos

  • Add Photos
  • View All

Forum

1964 DeVille Convertible, A/C with Front bucket seats for sale $34,995.00

Started by Ken Stout in For Sale on Monday. 0 Replies

1964 Cadillac DeVille convertible! Runs and drives perfectly! Factory correct 429 c.i. engine runs great and transmissions shifts as it should! Factory A/C car, converted to R12 freon, A/C works but…Continue

63 Coupe deVille for sale

Started by Russ Austin in General Discussion on Monday. 0 Replies

I have a 63 CDV with factory bucket seats for sale. Engine runs and I have not driven the car. 44,000m miles, clean AZ title. I believe this is a California car as there is an emissions sticker on…Continue

Parts car #28 and 29 are lined up.

Started by Russ Austin in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies

I brought in a 63 4 window sedan and a 64 6 window sedan for parts.  Bumper buckets are sold and I do not have any in stock. Please send me an email if you would like any parts. …Continue

2025 calendars are ordered.

Started by Russ Austin in General Discussion. Last reply by Russ Austin on Monday. 3 Replies

The 2025 63 64 Cadillac wall calendars have just been designed and ordered. I only order 50 and I sell out each year, so get yours early to guarantee a calendar.$15.00 plus shipping. Please email me…Continue

Blog Posts

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service