Happy Father's day to all the Dads, and to the Dad's that Inspired Us

I hope all the dad's out there have a great Father's Day, and each of us in turn remember the dad's that inspired us. My dad was a huge influence on me and cars and think back to all the great times we had with the old Cadillacs.  I was always more the "bookish" type around cars and he was always the more pragmatic hands-on type that taught me that you often learn a lot more by grabbing a hand full of tools and a flash light and just jumping under the car to figure out something.  In other words he taught me to learn by doing.  More importantly, our shared interest in cars deepened our bond and love for each other and always remember the great times we had together. Here is a video tribute I did of my dad a few years back using a song by Colin Hay, a favorite artist of mine, call 'Dear Father'.  The lyrics include the line "I've got your photograph" which brings me back to the many pictures we took working on the Cadllacs, a few of which you see in the video.

Perhaps others have memories with their dad, or sons and daughters they would like to share.

Facebook Facebook

Views: 107

Reply to This

Replies to This Discussion

Jason,
Great tribute. My experience is kind of the opposite of yours. My dad was a mechanical engineer who took the analytical approach. I was the young kid who was good with tools so I just wanted to take everything apart and then figure out what I needed to do. Mini bike engine won't start? Better strip it down and rebuild it, I figured. Pop would often come in at this point and offer some wisdom and help put everything back together.
I did figure out a lot doing things this way but eventually learned that working smart sure beats working hard.
My son who happens to currently be serving in the Air Force, is also pretty mechanically inclined but from the start, he was more on the methodical side. Before he took on a project, he usually had a plan of attack he had formulated from internet research. I guess I am the oddball caveman in the middle.

If there was an information superhighway available to me when I was a kid, I probably wouldn't have checked it until I had everything apart and needed to figure out how to put it back together. I certainly rely on it now though and wonder how we managed without it.

Bit early..... Father's day is 1st Sunday in September. (in Australia at least)

Every day is Father's Day for me. I probabl think about my dad every time I go on my garage.

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Radiator Leak - Time to Recore!

Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies

I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

64 Replacing dash illumination lights-how much has to come out to get to all of them?

Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies

Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue

Correct whitewalls

Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies

 I just replaced my tires from Diamondback (I had bad results in the past from Coker).  It was the second time, due to the age of the tires.  About 18 years ago Diamondback made custom whitewalls…Continue

Tags: width, whitewall, correct

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service