Our Next Newsletter feature - Bob Schles' 1964 Fleetwood Eldorado

Our next 1963/64 Cadillac Chapter Newsletter will feature Bob Schles' 1964 Fleetwood Eldorado and includes a story that takes us through his "nine-month engine rebuilding adventure". Here is an interesting preview of car and owner with Bob in the engine bay posing with his forward lamp harness in hand. Look for this feature story and our next newsletter by Mid-November.

Views: 100

Reply to This

Replies to This Discussion

Always great to see '64 Eldos profiled.  

I know of one in SoCal that I don't think you've covered..hint....hint. 

I have a 100% open door policy regarding featuring 1963/64 Cadillac Chapter Member cars! I have Bob's car to feature but after that nothing, zilch, nada. I am begging members to submit their car for a cover feature story. All I need is a write-up and a few decent pictures. Write-up can be on any angle on the car, from history of the car to a restoration project like Bob's, or just some nice pictures and general info about the car. When you are ready to submit send to my email at jasonedge64@outlook.com. 

I also don't care which body style whether you have a 6 window Series 62 sedan beater or an Eldo show queen.  My goals is to feature all members cars but with 377 current members I'm guessing we have about 350 to go!!!!

I have just about completed inserting Bob Schles excellent article and many pictures in our next newsletter which will feature his 1964 Eldorado and 9-month engine rebuild, and thought I would give a sample of pictures that made me smile - the before and after pictures of his transmission. Here is an example of a 60 year old transmission that was looking pretty rough with the crud and grease restored to like new. 

RSS

Photos

  • Add Photos
  • View All

Forum

Gear for power vent window

Started by James Barnes in Restoration Discussion. Last reply by Kurt 18 hours ago. 1 Reply

Im having a hard time locating the gear for the power vent window in my 64 Eldo. The existing one has 14 teeth and all I seem to be finding are ones with 17 teeth. Any suggestions?ThanksContinue

Rare Society of Automotive Engineers "The 1964 Cadillac Comfort Control" 1964 publication

Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue

Check out Marlina & David Stone's 1964 Coupe de Ville in January Self-Starter

Started by Jason Edge in Chapter Discussion. Last reply by Mack on Sunday. 2 Replies

We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter.   In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jan 21. 3 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service