Sealing up oil leaks
I'm having a shop replace outside seals/gaskets on engine and tranny. Engine was losing 3/4qt. every 250mi. So far only a small drip on rear main.
Bought an outside seal kit for tranny. sealed up dipstick, shift shaft, that went fine. Pan not so good. Went out and found a puddle under tranny for the second time after sitting the weekend. Going in for the third time to try and get it right. Are we missing something?? The shop about only deals with classic and performance stuff so he ain't no fly by night. I know you're only guessing on diagnosis but thought I'd throw it out there
Thanks for any suggestions.
Tom B
Replies to This Discussion
-
Permalink Reply by Kevin Campbell on
-
Try a straight edge over the face of the pan.
Over time, often to fix leaks, folks swing off the bolts like their doing up wheel nuts, which will buckle/distort the clamping face.
The pan can be beaten back into shape ok.
-
Permalink Reply by Tom Bahner on
-
Could this be a torus check valve problem? after sitting a couple days I end up with a puddle under the tranny. If so, I assume this is a tranny tear down to fix
Photos
Members
-
Markus Peter Online
-
-
Forum
Correct rims and drums?
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 3 hours ago. 5 Replies 0 Likes
As I am collecting items for a brake overhaul, I’ve have come across many posts about the aftermarket drums not being of quality like the originals. I am fairly certain the drums I have are not…Continue
cooling problem solved
Started by greg in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 6 hours ago. 6 Replies 1 Like
I have a 64 Fleetwood and in the summertime with the a/c cranking when I would be in traffic or going slow it would always run warm....close to the 3/4 mark sometimes. I replaced the fan clutch…Continue
Powder Coated Rims
Started by Logan Robb in 1963/64 Cadillac Specific Discussion 20 hours ago. 0 Replies 0 Likes
I have a very reputable blasting and powder coating shop near me, come this winter, I am thinking of getting my wheels power coated in preparation for new tires in the spring. Is this a good idea? I…Continue
Dragging to one side
Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Monday. 9 Replies 0 Likes
Hi there, after a lot of work on my brakes - new cylinder, hardware, shoes, hoses, going back to old drums, the car still drags to one side. Does this for years now, but I hoped to get rid of it…Continue
Blog Posts
WANTED HARMONIC BALANCER BOLT 1964 DEVILLE
Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments 0 Likes
Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine
in advance, thank you for your help.
Clock ‘64 DeVille
Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments 0 Likes
Is there still a member in the Detroit area that refurbishes clocks?
Matt VH
Spark Plug Heat Range
Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments 0 Likes
I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.
Here it is:
The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)
The insulator…
ContinueLower Front End Ball Joints
Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments 0 Likes
Good Morning all!
I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…
ContinueEvents
© 2023 Created by Jason Edge.
Powered by
