Hi all.   my 63 has developed squeaks and creaks recently.   I took a look at the ball joints and associated rubber parts, and they do look a bit worn.  I have replaced shocks in last year or so.  When I bounce the front ends, you can hear the squeak and "feel" the squeak when you put your hand on the upper control arm.  I put some oil on them to try and settle it down for temporary relief. I feel like Uncle Buck riding around with the squeek at stop lights!!   the prior owners that had the car  since orig purchase kept meticulous records and I cant find any efforts to replace them.  That would mean they have 175k miles on them.   

So I was wondering if it would be wise to replace the control arms with the newer configurations or just replace the ball joints and associated rubbers.    Would the newer engineered arms be worth it ride wise?  and if so, is any cutting or refitting required.  and further, is there any kit that anyone could recommend??

Views: 71

Reply to This

Replies to This Discussion

Kim

Take the car to a local auto shop of your choice 

They will be happy to inspect the front end and tell you what you  may be needing as they hope to do the work for you 

That will give you an idea what you need and the cost for the shop to do the job 

Will need the car front end realigned after the parts needed are replaced 

This is not a job I myself would be wanting to do or can do 

Enjoy 

Oh 

Have the front end greased by a shop that installs grease with a pressure machine ( not the hand pump kind ) 

That could solve the problem if you have not had your Cadillac front end  greased on schedule 

These cars SB greased every 6,000 miles (. When a tune up is required ) and often overlooked 

That could be your problem and solve it but not sure until you do that 

Do that first 

Enjoy 

RSS

Photos

  • Add Photos
  • View All

Forum

Correct rims and drums?

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 3 hours ago. 5 Replies

As I am collecting items for a brake overhaul, I’ve have come across many posts about the aftermarket drums not being of quality like the originals. I am fairly certain the drums I have are not…Continue

cooling problem solved

Started by greg in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 6 hours ago. 6 Replies

I have a 64 Fleetwood and in the summertime with the a/c cranking when I would be in traffic or going slow it would always run warm....close to the 3/4 mark sometimes.   I replaced the fan clutch…Continue

Powder Coated Rims

Started by Logan Robb in 1963/64 Cadillac Specific Discussion 20 hours ago. 0 Replies

I have a very reputable blasting and powder coating shop near me, come this winter, I am thinking of getting my wheels power coated in preparation for new tires in the spring. Is this a good idea? I…Continue

Dragging to one side

Started by Sammy in 1963/64 Cadillac Specific Discussion. Last reply by Tony and Ginny 429 on Monday. 9 Replies

Hi there, after a lot of work on my brakes - new cylinder, hardware, shoes, hoses, going back to old drums, the car still drags to one side. Does this for years now, but I hoped to get rid of it…Continue

Blog Posts

WANTED HARMONIC BALANCER BOLT 1964 DEVILLE

Posted by ANGELO MARTINEZ on July 23, 2023 at 10:44pm 3 Comments

  Hope someone can help me to find the harmonic balancer bolt for my 1964 Cadilac Deville 429 engine

in advance, thank you for your help.

Clock ‘64 DeVille

Posted by Matt Vander Hooven on July 23, 2023 at 7:36pm 2 Comments

Is there still a member in the Detroit area that refurbishes clocks?

Matt VH

Spark Plug Heat Range

Posted by Patrick Westphal on July 7, 2023 at 10:00am 3 Comments

I found a diagram that illustrates the main factor in determining a spark plug heat range that I was trying to describe to you during the chapter get together.

Here it is:

 

The main factor is the length of the ceramic insulator from the middle of the spark plug to the tip (where the spark happens)  

The insulator…

Continue

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service