Has anyone bought new oem headlights from Lectric Limited? They want $150 for a set of new remanufactured ones. Any advice would be appreciated.

Jeff

Views: 46

Reply to This

Replies to This Discussion

I have never bought reproduction T-3's. I didn't know (or perhaps have forgotten) that anyone was reproducing them. Can you provide a link?

Just fyi. I now have a large stash of the inner T-3's (the hi beams), but stay out of the more in demand outer (lo beam) T-3's.  I did pick up one out T-3 this past week in a batch of parts I picked up but it is a 1972 only T-3. 

Also as a reminder we have information on the T-3's (there were 6 different types depending on model year) and a great video link on our T-3 Headlamp Help Page.

 

 I have a set in my 60 coupe , I had a set in the 64 Eldo I sold I had them in when judged, I also have them in my 63 fleetwood.  https://www.lectriclimited.com/product/sealed-beam-bulb-set-5/

Thank you both for your help. I'll go ahead and order a set.

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Diaries - Nov 19, 2024: Install Cad Plated Fender Skirt Brackets

Started by Jason Edge in General Discussion. Last reply by Jason Edge 20 hours ago. 6 Replies

Now that I am past the radiator project (and a couple of house projects), I can pick away at the my 64 Coupe de Ville Dino a bit.  Today I installed the left driver side cad plated fender skirt…Continue

Anyone Ever Hear of or Use Gary's Steering Wheels

Started by Jason Edge in Restoration Discussion. Last reply by Dennis P. DiBari yesterday. 2 Replies

Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue

Dino Diaries - All Jacked Up For Christmas!

Started by Jason Edge in General Discussion. Last reply by Logan Robb yesterday. 4 Replies

I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue

Dino Diaries - Turbo HydraMatic Starter Bolts Replaced

Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Thursday. 0 Replies

While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service