Transmission questions
Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have any of the original throttle linkage/pedal assembly including the TV rod. Would not having the TV rod hooked up yet cause the transmission not to upshift?
Replies to This Discussion
-
Permalink Reply by Dennis P. DiBari on
-
Hi James,
Albeit I am not an expert on transmissions, that TV rod should be hooked up to the linkage, especially when higher throttle is used. Maybe Jason Edge would have the TV rod off of one of the parts cars? Pretty sure it is a must with the Hydra-matic transmission.
Dennis DiBari, Cottekill, NY
-
Permalink Reply by James Fraschieri on
-
Most of my experience is with small block chevys so I'm a bit out of my wheelhouse on this one but I'm enjoying learning new stuff. I have never been very good with transmissions in the first place so this hydra matic is completely unknown territory to me
-
Permalink Reply by Jason Edge on
-
I am not a Hydra-Matic expert but do know you need the TV Rod. I have them like new gold cadmium plated for $65 ($48.75 for Chapter Members) with the correct connectors at both ends to connect to transmission at bottom and carb throttle plate at top. You can see them by Clicking Here.
If interested in one of mine, or other parts, email me at jasonedge64@outlook.com
-
-
My problem is I have none of the original throttle assembly so I will have to fabricate something which won't be an issue. Is there anything vacuum controlled on the transmission?
-
-
There is no vacuum to the 1963/64 Hydramatic. The Turbo Hydramatic introduced in 1964 on certain body styles had a vacuum modulator but not the HydraMatic.
-
-
James,
There should be a vacuum modulator on the side of the transmission.
Dennis DiBari
-
-
Not on the HydraMatic.
-
Permalink Reply by Russ Austin on
-
I have a bracket that hooks up to Edelbrock carbs for the TV rod. Comes with the attaching hardware, you just drill 1 hole in the stock bracket.
50.00 plus shipping. Please email me at russ@thecadishack.com
Photos
Members
Forum
Fractured Finger, Keyboard Crippled
Started by Jason Edge in General Discussion. Last reply by Jason Edge 10 hours ago. 2 Replies 0 Likes
I haven't posted here much lately but wanted to pop in and say hello and share a minor but irritating personal mishap. Last week I tripped over a short ladder in my garage and came down in 4th finger…Continue
Hesitation on starting after driving
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Oct 10. 23 Replies 0 Likes
I have noticed that after I drive for 5-10 miles or more and then shut off the car, it hesitates when I go to start? Anyone experience this before and if so, what was the fix?Continue
Parts Car # 60 is History!
Started by Jason Edge in General Discussion Oct 8. 0 Replies 0 Likes
Here is my last view of a parts car when I have them stripped and taken to the local metal yard TT&E.Last night I removed the rear end assembly and other odds and ends under the rear of Parts Car…Continue
Trans Pan Seal Replacement
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Oct 8. 9 Replies 0 Likes
Since I purchased my 64 Fleetwood nearly a year ago, its had a transmission leak that has gradually gotten worse. Not to mention the intermittent no shift to third issue I have been struggling to…Continue
Blog Posts
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Vintage Air AC
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
accumulator dryer
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
Events
-
October 20, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
October 20, 2024 from 7pm to 8:30pm – Zoom
0 Comments 0 Likes
Videos
© 2024 Created by Jason Edge.
Powered by
