Hello all. New member and new to classic cadillacs so I have some questions. Last year I got my hands on a resto-mod 63 coupe deville project and have been making good progress till now. I don't have any of the original throttle linkage/pedal assembly including the TV rod. Would not having the TV rod hooked up yet cause the transmission not to upshift? 

Views: 75

Reply to This

Replies to This Discussion

Hi James,

     Albeit I am not an expert on transmissions, that TV rod should be hooked up to the linkage, especially when higher throttle is used.  Maybe Jason Edge would have the TV rod off of one of the parts cars?  Pretty sure it is a must with the Hydra-matic transmission.

Dennis DiBari, Cottekill, NY

Most of my experience is with small block chevys so I'm a bit out of my wheelhouse on this one but I'm enjoying learning new stuff. I have never been very good with transmissions in the first place so this hydra matic is completely unknown territory to me

I am not a Hydra-Matic expert but do know you need the TV Rod. I have them like new gold cadmium plated for $65 ($48.75 for Chapter Members) with the correct connectors at both ends to connect to transmission at bottom and carb throttle plate at top.  You can see them by Clicking Here
If interested in one of mine, or other parts, email me at jasonedge64@outlook.com

My problem is I have none of the original throttle assembly so I will have to fabricate something which won't be an issue. Is there anything vacuum controlled on the transmission? 

There is no vacuum to the 1963/64 Hydramatic. The Turbo Hydramatic introduced in 1964 on certain body styles had a vacuum modulator but not the HydraMatic.

James,

     There should be a vacuum modulator on the side of the transmission.

Dennis DiBari

Not on the HydraMatic. 

I have a bracket that hooks up to Edelbrock carbs for the TV rod. Comes with the attaching hardware, you just drill 1 hole in the stock bracket.

50.00 plus shipping.   Please email me at russ@thecadishack.com 

RSS

Photos

  • Add Photos
  • View All

Forum

Gear for power vent window

Started by James Barnes in Restoration Discussion 1 hour ago. 0 Replies

Im having a hard time locating the gear for the power vent window in my 64 Eldo. The existing one has 14 teeth and all I seem to be finding are ones with 17 teeth. Any suggestions?ThanksContinue

Rare Society of Automotive Engineers "The 1964 Cadillac Comfort Control" 1964 publication

Started by Jeff Tepper in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

HI all,I found this publication on Ebay last year and bought it immediately. No one has told me that they have ever seen or heard of this publication.It was put out by the Society of Automotive…Continue

Check out Marlina & David Stone's 1964 Coupe de Ville in January Self-Starter

Started by Jason Edge in Chapter Discussion. Last reply by Mack on Sunday. 2 Replies

We have another 63/64 Chapter Member spotlighted in the January 2025 Self-Starter.   In the "Letters to the Editor" section on page 6, you will see the picture below of Marlina & David Stone's…Continue

Christmas 2024 with the 1964 Fleetwood 60 Special

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge Jan 21. 3 Replies

A little late posting, but figured some may enjoy seeing it post holiday to keep the winter blues away!My wife, Annie, and I had a great time with the Fleetwood before the salt hit the roads here in…Continue

Blog Posts

'63 Tailfin Tales

Posted by Mark Mata on January 14, 2025 at 12:06am 1 Comment

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service